Static Graph

View Source On Gitee

Overview

In graph mode, Python code is not executed by the Python interpreter.Instead, the code is compiled into a static computation graph, and then the static computation graph is executed.

In static graph mode, MindSpore converts Python source code into Intermediate Representation IR by means of source code conversion and optimizes IR graphs on this basis, and finally executes the optimized graphs on hardware devices. MindSpore uses a functional IR based on graph representations, called MindIR. See middle representation MindIR for details .

MindSpore static graph execution process actually consists of two steps, corresponding to the Define and Run phases of the static graph, but in practice, the user will not perceive these two phases when the instantiated Cell object is called. MindSpore encapsulates both phases in the Cell __call__ method, so the actual calling process is:

model(inputs) = model.compile(inputs) + model.construct(inputs), where model is the instantiated Cell object.

The way to use the Graph mode is to set ms.set_context(mode=ms.GRAPH_MODE), then write the code in the construct function of the Cell so that the code in the construct function will be compiled into a static computation graph. For details about the definition of Cell, click Cell API document.

Due to syntax parsing restrictions, the supported data types, syntax, and related operations during graph building are not completely consistent with the Python syntax. As a result, some usage is restricted. Borrowing the traditional JIT compilation idea, considers the unification of static and dynamic graphs from the perspective of graph mode and extends the syntax capabilities of graph patterns. The static graph provides a syntax experience close to that of the dynamic graph, so as to realize the unity of dynamic and static. In order to facilitate users to choose whether to extend the static graph syntax, the JIT syntax support level option 'jit_syntax_level' is provided, and its value must be in the range of [STRICT,LAX], and selecting 'STRICT' is considered to use the basic syntax and do not extend the static graph syntax. The default value is 'LAX', please refer to the Extended Syntaxes (LAX level) section of this article for more information. All backends are supported at all levels.

  • STRICT: Only basic syntaxes is supported, and execution performance is optimal. Can be used for MindIR load and export.

  • LAX: Supporting more complex syntaxes, compatible with all Python syntax as much as possible. Cannot be used for MindIR load and export due to some syntax that may not be able to be exported.

The following describes the data types, syntax, and related operations supported during static graph building. These rules apply only to graph mode.

Basic Syntaxes (STRICT Level)

Constants and Variables Within Static Graphs

In static graphs, constants and variables are an important concept for understanding static graph syntax, and many syntaxes support different methods and degrees in the case of constant input and variable input. Therefore, before introducing the specific syntax supported by static graphs, this section first explains the concepts of constants and variables in static graphs.

In static graph mode, the operation of a program is divided into compilation period and execution period. During compilation, the program is compiled into an intermediate representation graph, and the program does not actually execute, but statically parses the intermediate representation through abstract deduction. This makes it impossible to guarantee that we will get the values of all intermediate representation nodes at compile time. Constants and variables are distinguished by their true values in the compiler.

  • Constant: The amount of value that can be obtained during compilation.

  • Variable: The amount of value that cannot be obtained during compilation.

Constants Generate Scenes

  • Scalars, lists, and tuples entered as graph mode are constants (without using the mutable interface). For example:

    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    a = 1
    b = [Tensor([1]), Tensor([2])]
    c = ["a", "b", "c"]
    
    class Net(nn.Cell):
       def construct(self, a, b, c):
          return a, b, c
    

    In the above code, enter a, b, c are constants.

  • The result of the constant operation is constant. For example:

    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    class Net(nn.Cell):
       def construct(self):
          a = 1
          b = "2"
          c = Tensor([1, 2, 3])
          return a, b, c
    

    In the above code, enter a, b, c are constants.

  • Constant operations obtain a constant result. For example:

    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    class Net(nn.Cell):
       def construct(self):
          a = Tensor([1, 2, 3])
          b = Tensor([1, 1, 1])
          c = a + b
          return c
    

    In the above code, a and b are constants of Tensor generated in the graph mode, so the result of their calculation is also constant. However, if one of them is a variable, its return value will also be a variable.

Variables Generate Scenes

  • The return value of all mutable interfaces is a variable (whether mutable is used outside the graph or inside the graph). For example:

    from mindspore import mutable
    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    a = mutable([Tensor([1]), Tensor([2])])
    
    
    class Net(nn.Cell):
       def construct(self, a):
          b = mutable(Tensor([3]))
          c = mutable((Tensor([1]), Tensor([2])))
          return a, b, c
    

    In the above code, a is generated by calling the mutable interface outside the graph, b and c are generated by calling the mutable interface inside the graph, and a, b, and c are variables.

  • Tensors that are inputs to static graphs are variables. For example:

    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    a = Tensor([1])
    b = (Tensor([1]), Tensor([2]))
    
    
    class Net(nn.Cell):
       def construct(self, a, b):
          return a, b
    

    In the above code, a is the Tensor input as the graph pattern, so it is a variable. But b is a tuple that is input to the graph schema, not a Tensor type, and even if its internal elements are Tensor, b is a constant.

  • What is calculated by variables is the variable

    If a quantity is the output of an operator, then it is in most cases variable. For example:

    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    a = Tensor([1])
    b = Tensor([2])
    
    class Net(nn.Cell):
       def construct(self, a, b):
          c = a + b
          return c
    

    In this case , c is the result of calculations of a and b , and the inputs a and b used for the calculation are variables , so c is also a variable.

Data Types

Built-in Python Data Types

Currently, the following built-in Python data types are supported: Number, String, List, Tuple, and Dictionary.

Number

Supporting int, float, and bool, but does not support complex numbers.

Number can be defined on the network. That is, the syntax y = 1, y = 1.2, and y = True are supported.

When the data is a constant, the value of the data can be achieved at compile time, the forcible conversion to Number is supported in the network. The syntax y = int(x), y = float(x), and y = bool(x) are supported. When the data is a variable, i.e., you can get the value only at runtime. It also supports data type conversion using built-in functions Python Built-in Functions such as int(), float() and bool(). For example:

import mindspore as ms
from mindspore import nn
from mindspore import context
from mindspore import Tensor

context.set_context(mode=ms.GRAPH_MODE)


class Net(nn.Cell):
   def construct(self, x):
      out1 = int(11.1)
      out2 = int(Tensor([10]))
      out3 = int(x.asnumpy())
      return out1, out2, out3

net = Net()
res = net(Tensor(2))
print("res[0]:", res[0])
print("res[1]:", res[1])
print("res[2]:", res[2])

The results are as follows:

res[0]: 11
res[1]: 10
res[2]: 2

Supporting returning Number. For example:

import mindspore as ms
from mindspore import nn
from mindspore import context
from mindspore import Tensor

context.set_context(mode=ms.GRAPH_MODE)


class Net(nn.Cell):
   def construct(self, x, y):
      return x + y

net = Net()
res = net(ms.mutable(1), ms.mutable(2))
print(res)

The results are as follows:

3
String

String can be constructed on the network, i.e., support for using quotes (' or ") to create strings such as x = 'abcd' or y = "efgh". Convert constants to strings by means of str(). Support string concatenation, truncation, and the use of membership operators (in or not in) to determine whether a string contains the specified character. Support for formatting string output by inserting a value into a string with the string format %s. Support for using the format string function str.format() in constant scenarios.

For example:

import mindspore as ms
from mindspore import nn
from mindspore import context
from mindspore import Tensor

context.set_context(mode=ms.GRAPH_MODE)

class Net(nn.Cell):
   def construct(self):
      var1 = 'Hello!'
      var2 = "MindSpore"
      var3 = str(123)
      var4 = "{} is {}".format("string", var3)
      return var1[0], var2[4:9], var1 + var2, var2 * 2, "H" in var1, "My name is %s!" % var2, var4

net = Net()
res = net()
print("res:", res)

The results are as follows:

res: ('H', 'Spore', 'Hello!MindSpore', 'MindSporeMindSpore', True, 'My name is MindSpore!', 'string is 123')
List

When 'JIT_SYNTAX_LEVEL' is set to 'LAX', static graph mode can support the inplace operation of some 'List' objects, see Supporting List Inplace Modification Operations.

The basic usage scenarios of 'List' are as follows:

  • The graph mode supports creating Lists in graph.

    Support creating List objects within graph mode, and the elements of the List objects can contain any of the types supported by the graph mode, as well as multiple levels of nesting. For example:

    import numpy as np
    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    class Net(nn.Cell):
       def construct(self):
          a = [1, 2, 3, 4]
          b = ["1", "2", "a"]
          c = [ms.Tensor([1]), ms.Tensor([2])]
          d = [a, b, c, (4, 5)]
          return d
    

    The above sample code, all List objects can be created normally.

  • The graph mode supports returning List

    Before MindSpore version 2.0, List is converted to Tuple when the graph mode returns a List object. In MindSpore version 2.0, List objects can be returned. For example:

    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    
    class Net(nn.Cell):
       def construct(self):
          a = [1, 2, 3, 4]
          return a
    
    net = Net()
    output = net()  # output: [1, 2, 3, 4]
    

    In the same way that a List is created within a graph mode, the graph mode returns a List object that can include any of the types supported by the graph mode, as well as multiple levels of nesting.

  • The graph mode supports obtaining List objects from global variables

    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    global_list = [1, 2, 3, 4]
    
    
    class Net(nn.Cell):
       def construct(self):
          global_list.reverse()
          return global_list
    
    net = Net()
    output = net()  # output: [4, 3, 2, 1]
    

    It should be noted that the list returned in the following pattern in the basic scenario is not the same object as the list of global variables, and when 'JIT_SYNTAX_LEVEL' is set to 'LAX', the returned object and the global object are unified objects.

  • Graph mode supports List as input

    The graph mode supports List as input to static graphs. The elements of the List object used as input must be of an input type supported by the graph mode, which also supports multiple levels of nesting.

    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    list_input = [1, 2, 3, 4]
    
    
    class Net(nn.Cell):
       def construct(self, x):
          return x
    
    net = Net()
    output = net(list_input)  # output: [1, 2, 3, 4]
    

    It should be noted that when 'List' is input as a static graph, it is always treated as a constant, regardless of the type of element inside it.

  • Graph mode supports built-in methods for List

    The 'List' built-in method is described in detail below:

    • List Index Value

      Basic syntax: element = list_object[index].

      Basic semantics: Extract the element in the 'List' object in the 'index' bit ('index' starts at 0). Supporting multi-level index values.

      Index value 'index' supported types include 'int', 'Tensor', and 'slice'. Among them, inputs of type 'int' and 'Tensor' can support constants and variables, and 'slice' internal data must be constants that can be determined at compile time.

      Examples are as follows:

      import mindspore as ms
      from mindspore import nn
      from mindspore import context
      from mindspore import Tensor
      
      context.set_context(mode=ms.GRAPH_MODE)
      
      class Net(nn.Cell):
         def construct(self):
            x = [[1, 2], 3, 4]
            a = x[0]
            b = x[0][ms.Tensor([1])]
            c = x[1:3:1]
            return a, b, c
      
      net = Net()
      a, b, c = net()
      print('a:{}'.format(a))
      print('b:{}'.format(b))
      print('c:{}'.format(c))
      

      The results are as follows:

      a:[1, 2]
      b:2
      c:[3, 4]
      
    • List index assignment

      Basic syntax: list_object[index] = target_element.

      Basic semantics: Assign the element in the 'List' object at bit 'index' to 'target_element' ('index' starts at 0). Support for multi-tier index assignment.

      Index value 'index' supported types include 'int', 'Tensor', and 'slice'. Among them, inputs of type 'int' and 'Tensor' can support constants and variables, and the internal data of 'slice' must be constant that can be determined at compile time.

      The index assignment object 'target_element' supports all data types supported by graph modes.

      Currently, the 'List' index assignment does not support the inplace operation, and a new object will be generated after the index is assigned. This operation will support the inplace operation in the future.

      Examples are as follows:

      import mindspore as ms
      from mindspore import nn
      from mindspore import context
      from mindspore import Tensor
      
      context.set_context(mode=ms.GRAPH_MODE)
      
      
      class Net(nn.Cell):
         def construct(self):
            x = [[0, 1], 2, 3, 4]
            x[1] = 10
            x[2] = "ok"
            x[3] = (1, 2, 3)
            x[0][1] = 88
            return x
      
      net = Net()
      output = net()
      print('output:{}'.format(output))
      

      The results are as follows:

      output:[[0, 88], 10, 'ok', (1, 2, 3)]
      
    • List.append

      Basic syntax: list_object.append(target_element).

      Basic semantics: Append the element 'target_element' to the last list_object' of the 'List' object.

      Currently, 'List.append' does not support the inplace operation, and a new object will be generated after append element. This operation will support the inplace operation in the future.

      Examples are as follows:

      import mindspore as ms
      from mindspore import nn
      from mindspore import context
      from mindspore import Tensor
      
      context.set_context(mode=ms.GRAPH_MODE)
      
      
      class Net(nn.Cell):
         def construct(self):
            x = [1, 2, 3]
            x.append(4)
            return x
      
      net = Net()
      x = net()
      print('x:{}'.format(x))
      

      The results are as follows:

      x:[1, 2, 3, 4]
      
    • List.clear

      Basic syntax: list_object.clear().

      Base semantics: Empty the elements contained in the 'List' object 'list_object'.

      Currently, 'List.clear' does not support inplace, and a new object will be generated after clear list. This operation will support inplace in the future.

      Examples are as follows:

      import mindspore as ms
      from mindspore import nn
      from mindspore import context
      from mindspore import Tensor
      
      context.set_context(mode=ms.GRAPH_MODE)
      
      
      class Net(nn.Cell):
         def construct(self):
            x = [1, 3, 4]
            x.clear()
            return x
      
      net = Net()
      x = net()
      print('x:{}'.format(x))
      

      The results are as follows:

      x:[]
      
    • List.extend

      Basic syntax: list_object.extend(target).

      Basic semantics: Insert all elements inside the 'target' to the end of the 'List' object 'list_object'.

      The supported types for 'target' are 'Tuple', 'List', and 'Tensor'. Among them, if the 'target' type is 'Tensor', the 'Tensor' will be converted to 'List' before inserting it.

      Examples are as follows:

      import mindspore as ms
      from mindspore import nn
      from mindspore import context
      from mindspore import Tensor
      
      context.set_context(mode=ms.GRAPH_MODE)
      
      class Net(nn.Cell):
         def construct(self):
            x1 = [1, 2, 3]
            x1.extend((4, "a"))
            x2 = [1, 2, 3]
            x2.extend(ms.Tensor([4, 5]))
            return x1, x2
      
      net = Net()
      output1, output2 = net()
      print('output1:{}'.format(output1))
      print('output2:{}'.format(output2))
      

      The results are as follows:

      output1:[1, 2, 3, 4, 'a']
      output2:[1, 2, 3, Tensor(shape=[1], dtype=Int64, value= [4]), Tensor(shape=[1], dtype=Int64, value= [5])]
      
    • List.pop

      Basic syntax: pop_element = list_object.pop(index=-1).

      Basic semantics: Remove the 'index' element of the 'List' object 'list_object' from the 'list_object' and return the element.

      The 'index' requires that it must be a constant 'int', and when 'list_object' has a length of 'list_obj_size', 'index' has a value range of '[-list_obj_size,list_obj_size-1]'. 'index' is a negative number representing the number of digits from back to front. When no 'index' is entered, the default value is -1, i.e. the last element is removed.

      import mindspore as ms
      from mindspore import nn
      from mindspore import context
      from mindspore import Tensor
      
      context.set_context(mode=ms.GRAPH_MODE)
      
      
      class Net(nn.Cell):
         def construct(self):
            x = [1, 2, 3]
            b = x.pop()
            return b, x
      
      net = Net()
      pop_element, res_list = net()
      print('pop_element:{}'.format(pop_element))
      print('res_list:{}'.format(res_list))
      

      The results are as follows:

      pop_element:3
      res_list:[1, 2]
      
    • List.reverse

      Basic syntax: list_object.reverse().

      Basic semantics: Reverse the order of the elements of the 'List' object 'list_object'.

      Examples are as follows:

      import mindspore as ms
      from mindspore import nn
      from mindspore import context
      from mindspore import Tensor
      
      context.set_context(mode=ms.GRAPH_MODE)
      
      
      class Net(nn.Cell):
         def construct(self):
            x = [1, 2, 3]
            x.reverse()
            return x
      
      net = Net()
      output = net()
      print('output:{}'.format(output))
      

      The results are as follows:

      output1:[3, 2, 1]
      
    • List.insert

      Basic syntax: list_object.insert(index, target_obj).

      Basic semantics: insert 'target_obj' into the 'index' bit of 'list_object'.

      The 'index' requirement must be a constant 'int'. If the length of 'list_object' is 'list_obj_size'. When 'index < -list_obj_size', insert the first place in 'List'. When 'index >= list_obj_size', insert at the end of 'List'. A negative 'index' represents the number of digits from back to front.

      Examples are as follows:

      import mindspore as ms
      from mindspore import nn
      from mindspore import context
      from mindspore import Tensor
      
      context.set_context(mode=ms.GRAPH_MODE)
      
      
      class Net(nn.Cell):
         def construct(self):
            x = [1, 2, 3]
            x.insert(3, 4)
            return x
      
      net = Net()
      output = net()
      print('output:{}'.format(output))
      

      The results are as follows:

      output:[1, 2, 3, 4]
      
Tuple

Tuple can be constructed on the network, that is, the syntax y = (1, 2, 3) is supported. The elements of the tuple Tuple cannot be modified, but indexed access to elements in the tuple Tuple is supported, and concatenated combinations of tuples are supported.

  • Supported index values

    Support accessing elements in the tuple Tuple using square brackets plus subscripted indexes. The index value can be int, slice, Tensor, and multi-level index value. That is, the syntax data = tuple_x[index0][index1]... is supported.

    Restrictions on the index value Tensor are as follows:

    • Tuple stores Cell. Each Cell must be defined before a tuple is defined. The number of input parameters, input parameter type, and input parameter shape of each Cell must be the same. The number of outputs of each Cell must be the same. The output type must be the same as the output shape.

    • The index Tensor is a scalar Tensor whose dtype is int32. The value range is [-tuple_len, tuple_len), and negative index is not supported in Ascend backend.

    • CPU, GPU and Ascend backend is supported.

    An example of the int and slice indexes is as follows:

    import numpy as np
    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    t = ms.Tensor(np.array([1, 2, 3]))
    
    class Net(nn.Cell):
       def construct(self):
          x = (1, (2, 3, 4), 3, 4, t)
          y = x[1][1]
          z = x[4]
          m = x[1:4]
          n = x[-4]
          return y, z, m, n
    
    net = Net()
    y, z, m, n = net()
    print('y:{}'.format(y))
    print('z:{}'.format(z))
    print('m:{}'.format(m))
    print('n:{}'.format(n))
    

    The results are as follows:

    y:3
    z:[1 2 3]
    m:((2, 3, 4), 3, 4)
    n:(2, 3, 4)
    

    An example of the Tensor index is as follows:

    import mindspore as ms
    from mindspore import nn, set_context
    
    set_context(mode=ms.GRAPH_MODE)
    
    class Net(nn.Cell):
       def __init__(self):
          super(Net, self).__init__()
          self.relu = nn.ReLU()
          self.softmax = nn.Softmax()
          self.layers = (self.relu, self.softmax)
    
       def construct(self, x, index):
          ret = self.layers[index](x)
          return ret
    
    x = ms.Tensor([-1.0], ms.float32)
    
    net = Net()
    ret = net(x, 0)
    print('ret:{}'.format(ret))
    

    The results are as follows:

    ret:[0.]
    
  • Support connection combinations

    Similar to the string String, tuples support combining using + and * to get a new tuple Tuple, for example:

    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    class Net(nn.Cell):
       def construct(self):
          x = (1, 2, 3)
          y = (4, 5, 6)
          return x + y, x * 2
    
    net = Net()
    out1, out2 = net()
    print('out1:{}'.format(out1))
    print('out2:{}'.format(out2))
    

    The results are as follows:

    out1:(1, 2, 3, 4, 5, 6)
    out2:(1, 2, 3, 1, 2, 3)
    
Dictionary

Dictionary can be constructed on the network. Each key value key:value is separated by a colon :, and each key value pair is separated by a comma ,. The entire dictionary contains the key-value pairs using curly braces {}. That is, the syntax y = {"a": 1, "b": 2} is supported.

The key is unique, and if there are multiple identical keys in the dictionary, the duplicate keys are finalized with the last one and the value value can be non-unique. The key key needs to be guaranteed to be immutable. Currently, the key can be String, Number, constant Tensor, or Tuple that contains these types. The value can be Number, Tuple, Tensor, List or Dictionary.

  • Supported APIs

    keys: extracts all key values from dict to form Tuple and return it.

    values: extracts all value values from dict to form Tuple and return it.

    items: extracts Tuple composed of each pair of value values and key values in dict to form List and return it.

    get: dict.get(key[, value]) returns the value value corresponding to the specified key, if the specified key does not exist, the default value None or the set default value value is returned .

    clear: removes all elements in dict.

    has_key: dict.has_key(key) determines whether the specified key exists in dict.

    update: dict1.update(dict2) updates the elements in dict2 to dict1.

    fromkeys: dict.fromkeys(seq([, value])) is used to create a new Dictionary, using the elements in the sequence seq as the key of the Dictionary, and the value is initial value corresponding to all key.

    The example is as follows, where the 'x' and 'new_dict' in the return value are a 'Dictionary', and the support is extended under the JIT syntax support level option LAX in graph mode, for more advanced use of Dictionary, please refer to the Supporting the high-level usage of Dictionary section of this article.

    import numpy as np
    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    x = {"a": ms.Tensor(np.array([1, 2, 3])), "b": ms.Tensor(np.array([4, 5, 6])), "c": ms.Tensor(np.array([7, 8, 9]))}
    
    
    class Net(nn.Cell):
       def construct(self):
          x_keys = x.keys()
          x_values = x.values()
          x_items = x.items()
          value_a = x.get("a")
          check_key = x.has_key("a")
          y = {"a": ms.Tensor(np.array([0, 0, 0]))}
          x.update(y)
          new_dict = x.fromkeys("abcd", 123)
          return x_keys, x_values, x_items, value_a, check_key, x, new_dict
    
    net = Net()
    x_keys, x_values, x_items, value_a, check_key, new_x, new_dict = net()
    print('x_keys:{}'.format(x_keys))
    print('x_values:{}'.format(x_values))
    print('x_items:{}'.format(x_items))
    print('value_a:{}'.format(value_a))
    print('check_key:{}'.format(check_key))
    print('new_x:{}'.format(new_x))
    print('new_dict:{}'.format(new_dict))
    

    The results are as follows:

    x_keys:('a', 'b', 'c')
    x_values:(Tensor(shape=[3], dtype=Int64, value= [1, 2, 3]), Tensor(shape=[3], dtype=Int64, value= [4, 5, 6]), Tensor(shape=[3], dtype=Int64, value= [7, 8, 9]))
    x_items:[('a', Tensor(shape=[3], dtype=Int64, value= [1, 2, 3])), ('b', Tensor(shape=[3], dtype=Int64, value= [4, 5, 6])), ('c', Tensor(shape=[3], dtype=Int64, value= [7, 8, 9]))]
    value_a:[1 2 3]
    check_key:True
    new_x:{'a': Tensor(shape=[3], dtype=Int64, value= [0, 0, 0]), 'b': Tensor(shape=[3], dtype=Int64, value= [4, 5, 6]), 'c': Tensor(shape=[3], dtype=Int64, value= [7, 8, 9])}
    new_dict:{'a': 123, 'b': 123, 'c': 123, 'd': 123}
    

MindSpore User-defined Data Types

Currently, MindSpore supports the following user-defined data types: Tensor, Primitive, and Cell.

Tensor

For details of Tensor, click Tensor API document.

Supporting creating and using Tensor. The ways to create a Tensor include using tensor function interface and using the class 'ms.Tensor' interface. It is recommended to use the former because users can specify the required dtype. The code case is as follows.

import mindspore as ms
import mindspore.nn as nn

class Net(nn.Cell):
   def __init__(self):
      super(Net, self).__init__()

   def construct(self, x):
      return ms.tensor(x.asnumpy(), dtype=ms.float32)

ms.set_context(mode=ms.GRAPH_MODE)
net = Net()
x = ms.Tensor(1, dtype=ms.int32)
print(net(x))

The results are as follows:

1.0
Primitive

Currently, Primitive and its subclass instances can be constructed in construct.

For example:

import mindspore as ms
from mindspore import nn, ops, Tensor, set_context
import numpy as np

set_context(mode=ms.GRAPH_MODE)

class Net(nn.Cell):
   def __init__(self):
      super(Net, self).__init__()

   def construct(self, x):
      reduce_sum = ops.ReduceSum(True) #`Primitive` and its subclass instances can be constructed in construct.
      ret = reduce_sum(x, axis=2)
      return ret

x = Tensor(np.random.randn(3, 4, 5, 6).astype(np.float32))
net = Net()
ret = net(x)
print('ret.shape:{}'.format(ret.shape))

The results are as follows:

ret.shape:(3, 4, 1, 6)

Currently, the attributes and APIs related to Primitive and its subclasses cannot be called on the network.

For details about the defined Primitive, click Primitive API document.

Cell

Currently, Cell and its subclass instances can be constructed on the network. That is, the syntax cell = Cell(args...) is supported.

However, during call, the parameter can be specified only in position parameter mode, and cannot be specified in the key-value pair mode. That is, the syntax cell = Cell(arg_name=value) is not supported.

Currently, the attributes and APIs related to Cell and its subclasses cannot be called on the network unless they are called through self in construct of Cell.

For details about the definition of Cell, click Cell API document.

Parameter

Parameter is a variable tensor, indicating the parameters that need to be updated during network training.

For details about the definition of Parameter, click Parameter API document.

Operators

Arithmetic operators and assignment operators support the Number and Tensor operations, as well as the Tensor operations of different dtype. For more details, please refer to Operators

Primaries

Primaries represent the most tightly bound operations of the language.

Attribute References and Attribute Modification

An attribute reference is a primary followed by a period and a name.

Using attribute references as l-values in Cell instances of MindSpore requires the following requirements:

  • The modified attribute belongs to this cell object, i.e. it must be self.xxx.

  • The attribute is initialized in Cell's 'init' function and is of type Parameter.

When the JIT syntax support level option is 'LAX', can support attribute modification in more situations, see Support Attribute Setting and Modification.

Examples are as follows:

import mindspore as ms
from mindspore import nn, set_context

set_context(mode=ms.GRAPH_MODE)

class Net(nn.Cell):
   def __init__(self):
      super().__init__()
      self.weight = ms.Parameter(ms.Tensor(3, ms.float32), name="w")
      self.m = 2

   def construct(self, x, y):
      self.weight = x  # The conditions are met, they can be modified
      # self.m = 3     # self.m is not of type Parameter and modification is prohibited
      # y.weight = x   # y is not self, modification is prohibited
      return x

net = Net()
ret = net(1, 2)
print('ret:{}'.format(ret))

The results are as follows:

ret:1

Index Value

Index value of a sequence Tuple, List, Dictionary, Tensor which called subscription in Python.

Index value of Tuple refers to chapter Tuple of this page.

Index value of List refers to chapter List of this page.

Index value of Dictionary refers to chapter Dictionary of this page.

Index value of Tensor refers to Tensor index value document.

Calls

A call calls a callable object (e.g., Cell or Primitive) with a possibly empty series of arguments.

For example:

import mindspore as ms
from mindspore import nn, ops, set_context
import numpy as np

set_context(mode=ms.GRAPH_MODE)

class Net(nn.Cell):
   def __init__(self):
      super().__init__()
      self.matmul = ops.MatMul()

   def construct(self, x, y):
      out = self.matmul(x, y)  # A call of Primitive
      return out

x = ms.Tensor(np.ones(shape=[1, 3]), ms.float32)
y = ms.Tensor(np.ones(shape=[3, 4]), ms.float32)
net = Net()
ret = net(x, y)
print('ret:{}'.format(ret))

The results are as follows:

ret:[[3. 3. 3. 3.]]

Statements

Currently supported Python statements include raise statement, assert statement, pass statement, return statement, break statement, continue statement, if statement, for statement, while statement, with statement, list comprehension, generator expression and function definition statement. For more details, please refer to Statements

Python Built-in Functions

Currently supported Python built-in functions include int, float, bool, str, list, tuple, getattr, hasattr, len, isinstance, all, any, round, max, min , sum, abs, partial, map, range, enumerate, super, pow, filter. The use of built-in functions in graph mode is similar to the corresponding Python built-in functions. For more details, please refer to Python Built-in Functions.

Network Definition

Network Input parameters

While calculating gradient for outermost network, only Tensor input could be calculated, input of other type will be ignored.

The code example is shown below. Among the input parameter (x, y,  z) of outermost network, x and z are Tensor type but y is not. While grad_net calculating gradient of the input parameters (x, y, z) for the network, gradient of y is automatically ignored. Only gradients of x and z are calculated, and (grad_x, grad_y) is returned.

import mindspore as ms
from mindspore import nn

ms.set_context(mode=ms.GRAPH_MODE)

class Net(nn.Cell):
   def __init__(self):
      super(Net, self).__init__()

   def construct(self, x, y, z):
      return x + y + z

class GradNet(nn.Cell):
   def __init__(self, net):
      super(GradNet, self).__init__()
      self.forward_net = net

   def construct(self, x, y, z):
      return ms.grad(self.forward_net, grad_position=(0, 1, 2))(x, y, z)

input_x = ms.Tensor([1])
input_y = 2
input_z = ms.Tensor([3])

net = Net()
grad_net = GradNet(net)
ret = grad_net(input_x, input_y, input_z)
print('ret:{}'.format(ret))

The results are as follows:

ret:(Tensor(shape=[1], dtype=Int64, value= [1]), Tensor(shape=[1], dtype=Int64, value= [1]))

Syntax Constraints of Basic Syntaxes

The execution graph in graph mode is converted from source code, and not all Python syntax can support it. The following describes some of the syntax constraints that exist under the basic syntax. More network compilation problems can be found in Network compilation.

  1. When an undefined class member is used in the construct function, AttributeError exception will be thrown. For example:

    import mindspore as ms
    from mindspore import nn, set_context
    
    set_context(mode=ms.GRAPH_MODE)
    
    class Net(nn.Cell):
       def __init__(self):
          super(Net, self).__init__()
    
       def construct(self, x):
          return x + self.y
    
    net = Net()
    net(1)
    

    The error is reported as follows:

    AttributeError: External object has no attribute y
    
  2. Class methods modified by classmethod in nn.Cell are not supported. For example:

    import mindspore as ms
    
    ms.set_context(mode=ms.GRAPH_MODE)
    
    class Net(ms.nn.Cell):
       @classmethod
       def func(cls, x, y):
          return x + y
    
       def construct(self, x, y):
          return self.func(x, y)
    
    net = Net()
    out = net(ms.Tensor(1), ms.Tensor(2))
    print(out)
    

    The error is reported as follows:

    TypeError: The parameters number of the function is 3, but the number of provided arguments is 2.
    
  3. In graph mode, some Python syntax is difficult to convert to intermediate MindIR in graph mode. For Python keywords, there are some keywords that are not supported in graph mode: AsyncFunctionDef, Delete, AnnAssign, AsyncFor, AsyncWith, Match, Try, Import, ImportFrom, Nonlocal, NamedExpr, Set, SetComp, Await, Yield, YieldFrom. If the relevant syntax is used in graph mode, an error message will alert the user.

    If you use the Try statement, the following example is used:

    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    class Net(nn.Cell):
       def construct(self, x, y):
          global_out = 1
          try:
             global_out = x / y
          except ZeroDivisionError:
             print("division by zero, y is zero.")
          return global_out
    
    net = Net()
    test_try_except_out = net(1, 0)
    print("out:", test_try_except_out)
    

    The error is reported as follows:

    RuntimeError: Unsupported statement 'Try'.
    
  4. Benchmarking Python built-in data types, except for Built-in Python Data Types supported in the current graph mode, complex 'complex' and collection 'set' types are not supported. Some high-level uses of the list 'list' and dictionary 'dictionary' are not supported in the basic syntax scenario, and need to be supported when the JIT syntax support level option 'jit_syntax_level' is 'LAX', please refer to the Extended Syntaxes (LAX level) section of this article for more information.

  5. In the basic syntax scenario, in addition to the Python Built-in Functions supported in the current graph mode, there are still some built-in functions that are not supported in graph mode. For example: basestring, bin, bytearray, callable, chr, cmp, compile, delattr, dir, divmod, eval, execfile, file, frozenset, hash, hex, id, input, issubclass, iter, locals, long, memoryview, next, object, oct, open, ord, property, raw_input, reduce, reload, repr, reverse, set, slice, sorted, unichr, unicode, vars, xrange, __import__.

  6. Python provides a number of third-party libraries that usually need to be called via import statements. In graph mode, when the JIT syntax support level is 'STRICT', you cannot directly use third-party libraries. If you need to use the data types of third-party libraries in graph mode or call methods of third-party libraries, you need to support them only if the JIT syntax support level option 'jit_syntax_level' is 'LAX', please refer to the Calling the Third-party Libraries section in Extended Syntaxes (LAX level) of this article.

  7. In graph mode, the modification of the attributes of the class outside the graph is not perceived, that is, the modification of the attributes of the class outside the graph will not take effect. For example:

    import mindspore as ms
    from mindspore import nn, ops, Tensor, context
    
    class Net(nn.Cell):
       def __init__(self):
          super().__init__()
          self.len = 1
    
       def construct(self, inputs):
          x = inputs + self.len
          return x
    
    context.set_context(mode=ms.GRAPH_MODE)
    inputs = 2
    net = Net()
    print("out1:", net(inputs))
    net.len = 2
    print("out2:", net(inputs))
    

    The result of the output will not change:

    out1: 3
    out2: 3
    

Extended Syntaxes (LAX level)

The following mainly introduces the static graph syntax supported by the current extension.

Calling the Third-party Libraries

  • Third-party libraries.

    1. Python built-in modules and Python standard libraries, such as os, sys, math, time and other modules.

    2. Third-party code libraries. Their module paths are under the site-packages directory of the Python installation directory, which need to be installed first and then imported, such NumPy and Scipy. It should be noted that MindSpore suites such as mindyolo and mindflow are not treated as third-party libraries. For a detailed list, please refer to the _modules_from_mindspore list of the parser file.

    3. Modules specified by the environment variable MS_JIT_IGNORE_MODULES. In contrast, there is the environment variable MS_JIT_MODULES. For more details, please refer to Environment Variables.

  • Supporting data types of third-party libraries, allowing calling and returning objects of third-party libraries.

    The code example is as follows.

    import numpy as np
    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    class Net(nn.Cell):
       def construct(self):
          a = np.array([1, 2, 3])
          b = np.array([4, 5, 6])
          out = a + b
          return out
    
    net = Net()
    print(net())
    

    The results are as follows:

    [5 7 9]
    
  • Supporting calling methods of third-party libraries.

    The code example is as follows.

    from scipy import linalg
    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    
    class Net(nn.Cell):
       def construct(self):
          x = [[1, 2], [3, 4]]
          return linalg.qr(x)
    
    net = Net()
    out = net()
    print(out[0].shape)
    

    The results are as follows:

    (2, 2)
    
  • Supporting creating Tensor instances by using the data types of the third-party library NumPy.

    The code example is as follows.

    import numpy as np
    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    
    class Net(nn.Cell):
       def construct(self):
          x = np.array([1, 2, 3])
          out = ms.Tensor(x) + 1
          return out
    
    net = Net()
    print(net())
    

    The results are as follows:

    [2, 3, 4]
    
  • The assignment of subscripts for data types in third-party libraries is supported.

    The code example is as follows.

    import numpy as np
    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    class Net(nn.Cell):
       def construct(self):
          x = np.array([1, 2, 3])
          x[0] += 1
          return ms.Tensor(x)
    
    net = Net()
    res = net()
    print("res: ", res)
    

    The results are as follows:

    res: [2 2 3]
    

Supporting the Use of Custom Classes

Custom classes can be used in graph mode, and classes can be instantiated and object properties and methods can be used.

For example, where 'GetattrClass' is a user-defined class that does not use the '@jit_class' decoration and does not inherit 'nn. Cell`。

import mindspore as ms

ms.set_context(mode=ms.GRAPH_MODE)

class GetattrClass():
   def __init__(self):
      self.attr1 = 99
      self.attr2 = 1

   def method1(self, x):
      return x + self.attr2

class GetattrClassNet(ms.nn.Cell):
   def __init__(self):
      super(GetattrClassNet, self).__init__()
      self.cls = GetattrClass()

   def construct(self):
      return self.cls.method1(self.cls.attr1)

net = GetattrClassNet()
out = net()
assert out == 100

Basic Operators Support More Data Type

In the syntax of graph mode, the following basic operators in the list is overloaded: ['+', '-', '*','/','//','%','**','<<','>>','&','|','^', 'not', '==', '!=', '<', '>', '<=', '>=', 'in', 'not in', 'y=x[0]']. For more details, please refer to Operators. When getting unsupported input type, those operators need to use extended static graph syntax to support, and make the output consistent with the output in the pynative mode.

The code example is as follows.

import mindspore as ms
import mindspore.nn as nn
from mindspore import Tensor
ms.set_context(mode=ms.GRAPH_MODE)

class InnerClass(nn.Cell):
   def construct(self, x, y):
      return x.asnumpy() + y.asnumpy()

net = InnerClass()
ret = net(Tensor([4, 5]), Tensor([1, 2]))
print(ret)

The results are as follows:

[5 7]

In the example above, since the output of x.asnumpy() is numpy.ndarray and is an unsupported input type of + in the graph mode, x.asnumpy() + y.asnumpy() will be supported by static graph syntax.

In another example:

import mindspore as ms
import mindspore.nn as nn
ms.set_context(mode=ms.GRAPH_MODE)

class InnerClass(nn.Cell):
   def construct(self):
      return (None, 1) in ((None, 1), 1, 2, 3)

net = InnerClass()
print(net())

The results are as follows:

True

tuple in tuple is an unsupported operation in original graph mode,and will be supported by static graph syntax.

Base Type

Use the JIT Fallback feature to extend support for Python's native data types 'List', 'Dictionary', 'None'.

Supporting List Inplace Modification Operations

The list 'List' and tuple 'Tuple' are the most basic sequential built-in types in Python, and the core difference between 'List' and 'Tuple' is that 'List' is an object that can be changed, while 'Tuple' cannot be changed. This means that once 'Tuple' is created, it cannot be changed without changing the object address. 'List', on the other hand, can modify an object without changing its address through a series of inplace operations. For example:

a = [1, 2, 3, 4]
a_id = id(a)
a.append(5)
a_after_id = id(a)
assert a_id == a_after_id

In the above example code, when you change the 'List' object through the 'append' inplace syntax, the address of the object is not changed. 'Tuple' does not support this kind of inplace. With 'JIT_SYNTAX_LEVEL' set to 'LAX', static graph mode can support the inplace operation of some 'List' objects.

The specific usage scenarios are as follows:

  • Support for getting the original 'List' object from a global variable

    In the following example, the static graph gets the 'List' object, performs the inplace operation 'list.reverse()' supported by graph mode on the original object, and returns the original object. It can be seen that the object returned by the graph mode has the same ID as the original global variable object, that is, the two are the same object. If 'JIT_SYNTAX_LEVEL' is set to the 'STRICT' option, the returned 'List' object and the global object are two different objects.

    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    global_list = [1, 2, 3, 4]
    
    
    class Net(nn.Cell):
       def construct(self):
          global_list.reverse()
          return global_list
    
    net = Net()
    output = net()  # output: [4, 3, 2, 1]
    assert id(global_list) == id(output)
    
  • Inplace operations on input 'List' objects are not supported

    When List' is imported as a static graph, the 'List' object is copied once, and subsequent calculations are performed using the copied object, so it is not possible to perform an inplace operation on the original input object. For example:

    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    list_input = [1, 2, 3, 4]
    
    class Net(nn.Cell):
       def construct(self, x):
          x.reverse()
          return x
    
    net = Net()
    output = net(list_input)  # output: [4, 3, 2, 1]  list_input: [1, 2, 3, 4]
    assert id(output) != id(list_input)
    

    As shown in the above use case, the 'List' object cannot be inplaced on the original object when input as a graph mode. The object returned by the graph mode is different from the object ID entered.

  • Support for in-place modification of some 'List' built-in functions

    With 'JIT_SYNTAX_LEVEL' set to 'LAX', the graph mode section 'List' built-in function supports inplace. In cases where 'JIT_SYNTAX_LEVEL' is 'STRICT', none of the methods support the inplace operation.

    Currently, the built-in methods for 'List' in-place modification supported by graph mode are 'extend', 'pop', 'reverse', and 'insert'. The built-in methods 'append', 'clear' and index assignment do not support in-place modification at the moment, and will be supported in subsequent versions.

    Examples are as follows:

    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    list_input = [1, 2, 3, 4]
    
    class Net(nn.Cell):
       def construct(self):
          list_input.reverse()
          return list_input
    
    net = Net()
    output = net()  # output: [4, 3, 2, 1]  list_input: [4, 3, 2, 1]
    assert id(output) == id(list_input)
    

Supporting the High-Level Usage of Dictionary

  • Support Top Graph Return Dictionary

    Examples are as follows:

    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    class Net(nn.Cell):
       def construct(self):
          x = {'a': 'a', 'b': 'b'}
          y = x.get('a')
          z = dict(y=y)
          return z
    
    net = Net()
    out = net()
    print("out:", out)
    

    The results are as follows:

    out:{'y': 'a'}
    
  • Support Dictionary Index Value Retrieval and Assignment

    Examples are as follows:

    import numpy as np
    import mindspore as ms
    from mindspore import nn
    from mindspore import context
    from mindspore import Tensor
    
    context.set_context(mode=ms.GRAPH_MODE)
    
    x = {"a": ms.Tensor(np.array([1, 2, 3])), "b": ms.Tensor(np.array([4, 5, 6])), "c": ms.Tensor(np.array([7, 8, 9]))}
    
    class Net(nn.Cell):
       def construct(self):
          y = x["b"]
          x["a"] = (2, 3, 4)
          return x, y
    
    net = Net()
    out1, out2 = net()
    print('out1:{}'.format(out1))
    print('out2:{}'.format(out2))
    

    The results are as follows:

    out1:{'a': (2, 3, 4), 'b': Tensor(shape=[3], dtype=Int64, value= [4, 5, 6]), 'c': Tensor(shape=[3], dtype=Int64, value= [7, 8, 9])}
    out2:[4 5 6]
    

Supporting the Usage of None

'None' is a special value in Python that represents null and can be assigned to any variable. Functions that do not have a return value statement are considered to return 'None'. At the same time, 'None' is also supported as the input parameter or return value of the top graph or subgraph. Support 'None' as a subscript of a slice as input to 'List', 'Tuple', 'Dictionary'.

Examples are as follows:

import mindspore as ms
from mindspore import nn
from mindspore import context
from mindspore import Tensor

context.set_context(mode=ms.GRAPH_MODE)

class Net(nn.Cell):
   def construct(self):
      return 1, "a", None

net = Net()
res = net()
print(res)

The results are as follows:

(1, 'a', None)

For functions with no return value, the 'None' object is returned by default.

import mindspore as ms
from mindspore import nn
from mindspore import context
from mindspore import Tensor

context.set_context(mode=ms.GRAPH_MODE)

class Net(nn.Cell):
   def construct(self):
      x = 3
      print("x:", x)

net = Net()
res = net()
assert res is None

As in the example below, 'None' is used as the default input parameter for the top graph.

import mindspore as ms
from mindspore import nn
from mindspore import context
from mindspore import Tensor

context.set_context(mode=ms.GRAPH_MODE)

class Net(nn.Cell):
   def construct(self, x, y=None):
      if y is not None:
         print("y:", y)
      else:
         print("y is None")
      print("x:", x)
      return y

x = [1, 2]
net = Net()
res = net(x)
assert res is None

Built-in Functions Support More Data Types

Extend the support for built-in functions. Python built-in functions perfectly support more input types, such as third-party library data types.

For example, in the following example, 'x.asnumpy()' and 'np.ndarray' are both types supported by extensions. More support for built-in functions can be found in the Python built-in functions section.

import numpy as np
import mindspore as ms
import mindspore.nn as nn

ms.set_context(mode=ms.GRAPH_MODE)

class Net(nn.Cell):
   def construct(self, x):
      return isinstance(x.asnumpy(), np.ndarray)

x = ms.Tensor(np.array([-1, 2, 4]))
net = Net()
out = net(x)
assert out

Supporting Control Flow

In order to improve the support of Python standard syntax, realize dynamic and static unification, and extend the support for more data types in the use of control flow statements. Control flow statements refer to flow control statements such as 'if', 'for', and 'while'. Theoretically, by extending the supported syntax, it is also supported in control flow scenarios. The code use cases are as follows:

import numpy as np
import mindspore as ms
from mindspore import nn
from mindspore import context
from mindspore import Tensor

context.set_context(mode=ms.GRAPH_MODE)

class Net(nn.Cell):
   def construct(self):
      x = np.array(1)
      if x <= 1:
         x += 1
      return ms.Tensor(x)

net = Net()
res = net()
print("res: ", res)

The results are as follows:

res: 2

Supporting Property Setting and Modification

The specific usage scenarios are as follows:

  • Set and modify properties of custom class objects and third-party types

In graph mode, you can set and modify the properties of custom class objects, such as:

import mindspore as ms
from mindspore import nn
from mindspore import context
from mindspore import Tensor

context.set_context(mode=ms.GRAPH_MODE)

class AssignClass():
   def __init__(self):
      self.x = 1

obj = AssignClass()

class Net(nn.Cell):
   def construct(self):
      obj.x = 100

net = Net()
net()
print(f"obj.x is: {obj.x}")

The results are as follows:

obj.x is: 100

In graph mode, you can set and modify the properties of third-party library objects, such as:

import numpy as np
import mindspore as ms
from mindspore import nn
from mindspore import context
from mindspore import Tensor

context.set_context(mode=ms.GRAPH_MODE)

class Net(nn.Cell):
   def construct(self):
      a = np.array([1, 2, 3, 4])
      a.shape = (2, 2)
      return a.shape

net = Net()
shape = net()
print(f"shape is {shape}")

The results are as follows:

shape is (2, 2)
  • Make changes to the Cell's self object, for example:

    import mindspore as ms
    from mindspore import nn, set_context
    set_context(mode=ms.GRAPH_MODE)
    
    class Net(nn.Cell):
       def __init__(self):
          super().__init__()
          self.m = 2
    
       def construct(self):
          self.m = 3
          return
    
    net = Net()
    net()
    print(f"net.m is {net.m}")
    

    The results are as follows:

    net.m is 3
    

    Note that the self object supports property modification and setting. If no attribute is defined in 'init', align the PYNATIVE mode, and the graph mode also allows this attribute to be set. For example:

    import mindspore as ms
    from mindspore import nn, set_context
    set_context(mode=ms.GRAPH_MODE)
    
    class Net(nn.Cell):
       def __init__(self):
          super().__init__()
          self.m = 2
    
       def construct(self):
          self.m2 = 3
          return
    
    net = Net()
    net()
    
  • Set and modify Cell objects and jit_class objects in the static graph

    Supporting property modification of objects jit_class graph mode, such as:

    import mindspore as ms
    from mindspore import nn, set_context, jit_class
    set_context(mode=ms.GRAPH_MODE)
    
    @jit_class
    class InnerClass():
       def __init__(self):
          self.x = 10
    
    class Net(nn.Cell):
       def __init__(self):
          super(Net, self).__init__()
          self.inner = InnerClass()
    
       def construct(self):
          self.inner.x = 100
          return
    
    net = Net()
    net()
    print(f"net.inner.x is {net.inner.x}")
    

    The results are as follows:

    net.inner.x is 100
    

Supporting Derivation

The static graph syntax supported by the extension also supports its use in derivation, such as:

import mindspore as ms
from mindspore import ops, set_context, nn
set_context(mode=ms.GRAPH_MODE)

class Net(nn.Cell):
   def construct(self, a):
      x = {'a': a, 'b': 2}
      return a, (x, (1, 2))

net = Net()
out = ops.grad(net)(ms.Tensor([1]))
assert out == 2

Annotation Type

For syntax supported by the runtime extensions, nodes are generated that cannot be derived by type, such as dynamically created Tensors, which are called Any types. Because this type cannot be inferred correctly at compile time, the Any type will be operated on with a default maximum precision of float64 to prevent loss of precision. In order to better optimize performance, it is necessary to reduce the generation of Any type data. When the user can clearly know the specific type that will be generated by the extended syntax, we recommend using Annotation to specify the corresponding Python statement type, thereby determining the type of the interpretation node and avoiding the generation of Any type.

For example, the difference between the Tensor class and the tensor interface lies in the use of the Annotation Type mechanism within the tensor interface. When the dtype of the tensor function is determined, the function uses Annotation to specify the output type, thereby avoiding the generation of Any type. The use of Annotation Type only requires adding a comment # @jit.typing: () -> tensor_type[float32] above or after the corresponding Python statement, where tensor_type[float32] after -> indicates the output type of the annotated statement.

The code example is as follows.

import mindspore as ms
import mindspore.nn as nn
from mindspore import ops, Tensor

class Net(nn.Cell):
   def __init__(self):
      super(Net, self).__init__()
      self.abs = ops.Abs()

   def construct(self, x, y):
      z = x.asnumpy() + y.asnumpy()
      y1 = ms.tensor(z, dtype=ms.float32)
      y2 = ms.Tensor(z, dtype=ms.float32) # @jit.typing: () -> tensor_type[float32]
      y3 = Tensor(z)
      y4 = Tensor(z, dtype=ms.float32)
      return self.abs(y1), self.abs(y2), self.abs(y3), self.abs(y4)

ms.set_context(mode=ms.GRAPH_MODE)
net = Net()
x = ms.Tensor(-1, dtype=ms.int32)
y = ms.Tensor(-1, dtype=ms.float32)
y1, y2, y3, y4 = net(x, y)

print(f"y1 value is {y1}, dtype is {y1.dtype}")
print(f"y2 value is {y2}, dtype is {y2.dtype}")
print(f"y3 value is {y3}, dtype is {y3.dtype}")
print(f"y4 value is {y4}, dtype is {y4.dtype}")

The results are as follows:

y1 value is 2.0, dtype is Float32
y2 value is 2.0, dtype is Float32
y3 value is 2.0, dtype is Float64
y4 value is 2.0, dtype is Float64

In the above example, you can see the difference related to creating 'Tensor'. Due to the lack of Annotation indication in the Tensor class, y3 and y4 cannot infer the correct type and can only perform operations in the highest precision float64. For y2, the corresponding type for JIT Fallback was specified through Annotation during Tensor creation, allowing it to perform operations according to the specified type. y1 created the Tensor using the tensor function interface and passed the dtype parameter as an Annotation indication, avoiding the generation of Any type.

Syntax Constraints of Extended Syntaxes

When using the static graph extension support syntax, note the following points:

  1. In order to match the support capability of the dynamic graph. That is, it must be within the scope of dynamic graph syntax, including but not limited to data types.

  2. When extending the static graph syntax, more syntax is supported, but the execution performance may be affected and is not optimal.

  3. When extending the static graph syntax, more syntax is supported, and the ability to import and export cannot be used with MindIR due to use Python.

  4. It is not currently supported that the repeated definition of global variables with the same name across Python files, and these global variables are used in the network.