Single-Node Data Cache

If you need to repeatedly access remote datasets or load datasets from disks, you can use the single-node cache operator to cache datasets in the local memory to accelerate dataset loading.

The cache operator depends on the cache server started on the current node. Functioning as a daemon process and independent of the training script, the cache server is mainly used to manage cached data, including storing, querying, and loading data, and writing cached data when the cache is not hit.

If the memory space is insufficient to cache all datasets, you can configure a cache operator to cache the remaining data to disks.

Currently, the cache service supports only single-node cache. That is, the client and server are deployed on the same machine. This service can be used in the following scenarios:

Cache the loaded original dataset.

You can use the cache in the dataset loading operator. The loaded data is stored in the cache server. If the same data is required subsequently, the data can be directly load from the cache server, avoiding repeated loading from the disk.
Cache the data processed by argumentation.

You can also use the cache in the map operator. The data processed by argumentation (such as image cropping or resizing) is directly cached, avoiding repeated data argumentation operations and reducing unnecessary computations.

Data Cache Process

Before using the cache service, you need to install MindSpore and set the relevant environment variables.

At present, data cache can only be performed in the Linux environment. Ubuntu, EulerOS and CentOS can refer to the relevant tutorials to learn how to increase the swap memory space. In addition, since the use of cache may cause the server’s memory shortage, it is recommended that users increase the server’s swap memory space to more than 100GB before using the cache.

1. Start the cache server

Before using the single-node cache serve, you need to enter the following command at the command line to start the cache server:

cache_admin --start

If the above information is output, it means that the cache server starts successfully.

The preceding commands can use the -h and -p parameters to specify the server, or the user can specify it by configuring environment variables MS_CACHE_HOST and MS_CACHE_PORT. If not specified, the default operation is performed on servers with IP 127.0.0.1 and port number 50052.

The ps -ef|grep cache_server command can be used to check if the server is started and query server parameters.

The cache_admin --server_info command can also be used to check a detailed list of parameters for the server.

To enable the data overflow feature, the user must set the overflow path with the -s parameter when starting the cache server, or the feature is turned off by default.

cache_admin --server_info

The Cache Server Configuration table lists the IP address, port number, number of worker threads, log level, overflow path and other detailed configuration information of the current server. The Active sessions module displays a list of session IDs that are enabled in the current server.

The cache server log file is named in the format “cache_server.<host name>.<user name>.log.<log level>.<data-time>.<process number>”.

When GLOG_v=0, DEBUG log may be displayed on the screen.

2. Create the cache session

If there is no cache session in the cache server, you need to create a cache session and get the cache session id:

cache_admin -g

where 780643335 is the cache session id assigned to the server on port 50052, and the cache session id is assigned by the server.

The cache_admin --list_sessions command can be used to check all cache session information existing in the current server.

cache_admin --list_sessions

Output parameters description:

Session: cache session id.
Cache Id: cache instance id in the current cache session. n/a indicates that the cache instance has not been created at the moment.
Mem cached: the amount of data cached in memory.
Disk cached: the amount of data cached in disk.
Avg cache size: the average size of each row of data currently cached.
Numa hit: the number of Numa hits. The higher value will get the better time performance.

3. Create a cache instance

In the Python training script, use the DatasetCache API to define a cache instance named test_cache, and put a cache session ID created in the previous step to the session_id parameter.

import mindspore.dataset as ds

test_cache = ds.DatasetCache(session_id=1456416665, size=0, spilling=False)

DatasetCache supports the following parameters:

session_id: specifies the cache session ID, which can be created and obtained by running the cache_admin -g command.
size: specifies the maximum memory space occupied by the cache. The unit is MB. For example, if the cache space is 512 GB, set size=524288. The default value is 0.
spilling: determines whether to spill the remaining data to disks when the memory space exceeds the upper limit. The default value is False.
hostname: specifies the IP address for connecting to the cache server. The default value is 127.0.0.1.
port: specifies the port number for connecting to the cache server. The default value is 50052.
num_connections: specifies the number of established TCP/IP connections. The default value is 12.
prefetch_size: specifies the number of prefetched rows. The default value is 20.

The following things that needs to be noted:

In actual use, you are advised to run the cache_admin -g command to obtain a cache session id from the cache server and use it as the parameter of session_id to prevent errors caused by cache session nonexistence.

size=0 indicates that the memory space used by the cache is not limited manually, but automically controlled by the cache server according to system’s total memory resources, and cache server’s memory usage would be limited to within 80% of the total system memory.

Users can also manually set size to a proper value based on the idle memory of the machine. Note that before setting the size parameter, make sure to check the available memory of the system and the size of the dataset to be loaded. If the memory space occupied by the cache_server or the space of the dataset to be loaded exceeds the available memory of the system, it may cause problems such as machine downtime/restart, automatic shutdown of cache_server, and failure of training process execution.

spilling=True indicates that the remaining data is written to disks when the memory space is insufficient. Therefore, ensure that you have the writing permission and the sufficient disk space on the configured disk path is to store the cache data that spills to the disk. Note that if no spilling path is set when cache server starts, setting spilling=True will raise an error when calling the API.

spilling=False indicates that no data is written once the configured memory space is used up on the cache server.

If a dataset that does not support random access (such as TFRecordDataset) is used to load data and the cache service is enabled, ensure that the entire dataset is stored locally. In this scenario, if the local memory space is insufficient to store all data, spilling must be enabled to spill data to disks.

4. Insert a cache instance

Currently, the cache service can be used to cache both original datasets and datasets processed by argumentation. The following example shows two usage methods.

Note that both examples need to create a cache instance according to the method in step 3, and pass in the created test_cache as cache parameters in the dataset load or map operator.

CIFAR-10 dataset is used in the following two examples.

from download import download
import os
import shutil

url = "https://mindspore-website.obs.cn-north-4.myhuaweicloud.com/notebook/datasets/cifar-10-binary.tar.gz"
path = download(url, "./datasets", kind="tar.gz")

test_path = "./datasets/cifar-10-batches-bin/test"
train_path = "./datasets/cifar-10-batches-bin/train"
os.makedirs(test_path, exist_ok=True)
os.makedirs(train_path, exist_ok=True)
if not os.path.exists(os.path.join(test_path, "test_batch.bin")):
    shutil.move("./datasets/cifar-10-batches-bin/test_batch.bin", test_path)
[shutil.move("./datasets/cifar-10-batches-bin/"+i, train_path) for i in os.listdir("./datasets/cifar-10-batches-bin/") if os.path.isfile("./datasets/cifar-10-batches-bin/"+i) and not i.endswith(".html") and not os.path.exists(os.path.join(train_path, i))]

The directory structure of the extracted dataset file is as follows:

./datasets/cifar-10-batches-bin
├── readme.html
├── test
│   └── test_batch.bin
└── train
    ├── batches.meta.txt
    ├── data_batch_1.bin
    ├── data_batch_2.bin
    ├── data_batch_3.bin
    ├── data_batch_4.bin
    └── data_batch_5.bin

Cache the original dataset data

Cache the original dataset, and the datat is loaded by the MindSpore system.

dataset_dir = "./datasets/cifar-10-batches-bin/train"

# apply cache to dataset
data = ds.Cifar10Dataset(dataset_dir=dataset_dir, num_samples=4, shuffle=False, num_parallel_workers=1, cache=test_cache)

num_iter = 0
for item in data.create_dict_iterator(num_epochs=1):  # each data is a dictionary
    # in this example, each dictionary has a key "image"
    print("{} image shape: {}".format(num_iter, item["image"].shape))
    num_iter += 1

You can run the cache_admin --list_sessions command to check whether there are four data records in the current session. If yes, the data is successfully cached.

cache_admin --list_sessions

Cache the data processed by argumentation

Cache data after data enhancement processing transforms.

import mindspore.dataset.vision as vision

dataset_dir = "cifar-10-batches-bin/"

# apply cache to dataset
data = ds.Cifar10Dataset(dataset_dir=dataset_dir, num_samples=5, shuffle=False, num_parallel_workers=1)

# apply cache to map
rescale_op = vision.Rescale(1.0 / 255.0, -1.0)
data = data.map(input_columns=["image"], operations=rescale_op, cache=test_cache)

num_iter = 0
for item in data.create_dict_iterator(num_epochs=1):  # each data is a dictionary
    # in this example, each dictionary has a keys "image"
    print("{} image shape: {}".format(num_iter, item["image"].shape))
    num_iter += 1

image shape: (32, 32, 3)
image shape: (32, 32, 3)
image shape: (32, 32, 3)
image shape: (32, 32, 3)
image shape: (32, 32, 3)

You can run the cache_admin --list_sessions command to check whether there are five data records in the current session. If yes, the data is successfully cached.

cache_admin --list_sessions

5. Destroy the cache session

After the training is complete, you can destroy the current cache and release the memory.

cache_admin --destroy_session 780643335

The preceding command is used to destroy the cache with the session ID 1456416665 on the server with the port number 50052.

If you choose not to destroy the cache, the cached data still exists in the cache session. You can use the cache when starting the training script next time.

6. Stop the cache server

After using the cache server, you can stop it. This operation will destroy all cache sessions on the current server and release the memory.

cache_admin --stop

The preceding command is used to shut down the server with the port number 50052.

If you choose not to shut down the server, the cache sessions on the server will be retained for future use. During the next training, you can create a cache session or reuse the existing cache.

Cache Acceleration

In order to share large data sets among multiple servers and alleviate the disk space requirements of a single server, users can usually choose to use NFS (Network File System), such as HUAWEI CLOUD-NFS Storage Server.

However, access to NFS datasets is often expensive, resulting in longer training sessions by using NFS datasets.

In order to improve the training performance of the NFS dataset, we can choose to use a cache service to cache the dataset in memory as Tensor.

Once cached, post-sequence epochs can read data directly from memory, avoiding the overhead of accessing remote NAS.

It should be noted that in the data processing process of the training process, and the dataset usually needs to be augmentated with randomness after loading, such as RandomCropDecodeResize. If the cache is added to the operation with randomness, it will cause the results of the first enhancement operation to be cached, and the results read from the cache server in the later sequence are the first cached data, resulting in the loss of data randomness and affecting the accuracy of the training network.

Therefore, we can choose to add a cache directly after the data set reads the operator. This section takes this approach, using the MobileNetV2 network as a sample for an example.

For complete sample code, refer to ModelZoo’s MobileNetV2.

Create Shell script cache_util.sh for managing cache:

bootup_cache_server()
   {
     echo "Booting up cache server..."
     result=$(cache_admin --start 2>&1)
     echo "${result}"
   }

   generate_cache_session()
   {
     result=$(cache_admin -g | awk 'END {print $NF}')
     echo "${result}"
   }

Complete sample code: cache_util.sh.

In the Shell script run_train_nfs_cache.sh that starts NFS dataset training, turn on the cache server for the scenario trained with datasets located on NFS and generate a cache session saved in the Shell variable CACHE_SESSION_ID:
```
CURPATH="${dirname "$0"}"
   source ${CURPATH}/cache_util.sh

   bootup_cache_server
   CACHE_SESSION_ID=$(generate_cache_session)
```

Pass in the CACHE_SESSION_ID and other parameters when starting Python training:

python train.py \
--platform=$1 \
--dataset_path=$5 \
--pretrain_ckpt=$PRETRAINED_CKPT \
--freeze_layer=$FREEZE_LAYER \
--filter_head=$FILTER_HEAD \
--enable_cache=True \
--cache_session_id=$CACHE_SESSION_ID \
&> log$i.log &

In the train_parse_args() function of Python’s parameter parsing script args.py, the incoming cache_session_id is received by the following code:

cache_session_id：

import argparse

def train_parse_args():
...
    train_parser.add_argument('--enable_cache',
        type=ast.literal_eval,
        default=False,
        help='Caching the dataset in memory to speedup dataset processing, default is False.')
    train_parser.add_argument('--cache_session_id',
         type=str,
         default="",
         help='The session id for cache service.')
train_args = train_parser.parse_args()

And call the train_parse_args() function in Python’s training script train.py to parse the parameters such as the cache_session_id passed in, and pass it in as an argument when defining the dataset dataset.

from src.args import train_parse_args
args_opt = train_parse_args()

dataset = create_dataset(
    dataset_path=args_opt.dataset_path,
    do_train=True,
    config=config,
    enable_cache=args_opt.enable_cache,
    cache_session_id=args_opt.cache_session_id)

In the Python script dataset.py that defines the data processing process, an instance of DatasetCache is created and inserted after ImageFolderDataset based on the parameters enable_cache and cache_session_id passed in:

def create_dataset(dataset_path, do_train, config, repeat_num=1, enable_cache=False, cache_session_id=None):
...
    if enable_cache:
        nfs_dataset_cache = ds.DatasetCache(session_id=int(cache_session_id), size=0)
    else:
        nfs_dataset_cache = None

    if config.platform == "Ascend":
        rank_size = int(os.getenv("RANK_SIZE", '1'))
        rank_id = int(os.getenv("RANK_ID", '0'))
        if rank_size == 1:
            data_set = ds.ImageFolderDataset(dataset_path, num_parallel_workers=8, shuffle=True, cache=nfs_dataset_cache)
        else:
            data_set = ds.ImageFolderDataset(dataset_path, num_parallel_workers=8, shuffle=True, num_shards=rank_size, shard_id=rank_id, cache=nfs_dataset_cache)

Run run_train_nfs_cache.sh, and obtain the following results:

epoch: [  0/ 200], step:[ 2134/ 2135], loss:[4.682/4.682], time:[3364893.166], lr:[0.780]
epoch time: 3384387.999, per step time: 1585.193, avg loss: 4.682
epoch: [  1/ 200], step:[ 2134/ 2135], loss:[3.750/3.750], time:[430495.242], lr:[0.724]
epoch time: 431005.885, per step time: 201.876, avg loss: 4.286
epoch: [  2/ 200], step:[ 2134/ 2135], loss:[3.922/3.922], time:[420104.849], lr:[0.635]
epoch time: 420669.174, per step time: 197.035, avg loss: 3.534
epoch: [  3/ 200], step:[ 2134/ 2135], loss:[3.581/3.581], time:[420825.587], lr:[0.524]
epoch time: 421494.842, per step time: 197.421, avg loss: 3.417
...

The following table shows the average epoch time on gpu servers of using cache versus or not using cache:

   | 4p, MobileNetV2, imagenet2012            | without cache | with cache |
   | ---------------------------------------- | ------------- | ---------- |
   | first epoch time                         | 1649s         | 3384s      |
   | average epoch time (exclude first epoch) | 458s          | 421s       |

You can see that after using the cache, the completion time of the first epoch increases more than if the cache is not used, which is mainly due to the overhead of writing cache data to the cache server. However, each subsequent epoch after caching data writes can get a large performance gain. Therefore, the greater the total number of episodes trained, the more pronounced the benefits of using the cache.

Taking running 200 epochs as an example, using caching can reduce the total end-to-end training time from 92791 seconds to 87163 seconds, saving a total of about 5628 seconds.

When finish using, you can choose to shut down the cache server:

$ cache_admin --stop
Cache server on port 50052 has been stopped successfully.

Cache Performance Tuning

The cache service performance can be significantly improved in following scenarios:

Cache the data processed by augmentation, especially when the data processing pipeline contains high complexity operations such as decode. In this scenario, you do not need to perform the data augmentation operation repeatedly on each epoch, which saves a lot of time.
Use cache services during simple network training and inference. Compared with complex networks, simple networks require less training time. Therefore, the time performance is significantly improved when cache services are used in this scenario.

However, we may not benefit from cache in the following scenarios:

The system memory is insufficient or the cache is not hit, resulting in poor cache service time performance. You can check whether the available system memory is sufficient and set a proper cache size before using the cache.
Too much cache spilling will deteriorate the time performance. Therefore, try not to spill cache to disks when datasets that support random access (such as ImageFolderDataset) are used for data loading.
Using cache on NLP network such as Bert does not perform. In the NLP scenarios, there are usually no high complexity data augmentation operations like decode.
There is expectable startup overhead when using cache in non-mappable datasets like TFRecordDataset. According to the current design, it is required to cache all rows to the cache server before the first epoch of training. So the first epoch time can be longer than the non-cache case.

Limitations

Currently, dataset classes such as GraphDataset, GeneratorDataset, PaddedDataset, and NumpySlicesDataset do not support cache. GeneratorDataset, PaddedDataset, and NumpySlicesDataset belong to GeneratorOp, so their error message is displayed as “There is currently no support for GeneratorOp under cache.”
Data processed by batch, concat, filter, repeat, skip, split, take, and zip does not support cache.
Data processed by random data argumentation operations (such as RandomCrop) does not support cache.
The same cache instance cannot be nested in different locations of the same pipeline.