# Copyright 2019-2024 Huawei Technologies Co., Ltd
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
"""
Interpolation Mode, Resampling Filters
"""
from enum import Enum, IntEnum
from fractions import Fraction
import numbers
import numpy as np
from PIL import Image
import mindspore
import mindspore._c_dataengine as cde
# The following constants have been deprecated by Pillow since version 9.1.0
if int(Image.__version__.split(".")[0]) > 9 or Image.__version__ >= "9.1.0":
FLIP_LEFT_RIGHT = Image.Transpose.FLIP_LEFT_RIGHT
FLIP_TOP_BOTTOM = Image.Transpose.FLIP_TOP_BOTTOM
PERSPECTIVE = Image.Transform.PERSPECTIVE
AFFINE = Image.Transform.AFFINE
NEAREST = Image.Resampling.NEAREST
ANTIALIAS = Image.Resampling.LANCZOS
LINEAR = Image.Resampling.BILINEAR
CUBIC = Image.Resampling.BICUBIC
else:
FLIP_LEFT_RIGHT = Image.FLIP_LEFT_RIGHT
FLIP_TOP_BOTTOM = Image.FLIP_TOP_BOTTOM
PERSPECTIVE = Image.PERSPECTIVE
AFFINE = Image.AFFINE
NEAREST = Image.NEAREST
ANTIALIAS = Image.ANTIALIAS
LINEAR = Image.LINEAR
CUBIC = Image.CUBIC
[文档]class AutoAugmentPolicy(str, Enum):
"""
AutoAugment policy for different datasets.
Possible enumeration values are: ``AutoAugmentPolicy.IMAGENET``, ``AutoAugmentPolicy.CIFAR10``,
AutoAugmentPolicy.SVHN.
Each policy contains 25 pairs of augmentation operations. When using AutoAugment, each image is randomly
transformed with one of these operation pairs. Each pair has 2 different operations. The following shows
all of these augmentation operations, including operation names with their probabilities and random params.
- ``AutoAugmentPolicy.IMAGENET``: dataset auto augment policy for ImageNet.
.. code-block::
Augmentation operations pair:
[(("Posterize", 0.4, 8), ("Rotate", 0.6, 9)), (("Solarize", 0.6, 5), ("AutoContrast", 0.6, None)),
(("Equalize", 0.8, None), ("Equalize", 0.6, None)), (("Posterize", 0.6, 7), ("Posterize", 0.6, 6)),
(("Equalize", 0.4, None), ("Solarize", 0.2, 4)), (("Equalize", 0.4, None), ("Rotate", 0.8, 8)),
(("Solarize", 0.6, 3), ("Equalize", 0.6, None)), (("Posterize", 0.8, 5), ("Equalize", 1.0, None)),
(("Rotate", 0.2, 3), ("Solarize", 0.6, 8)), (("Equalize", 0.6, None), ("Posterize", 0.4, 6)),
(("Rotate", 0.8, 8), ("Color", 0.4, 0)), (("Rotate", 0.4, 9), ("Equalize", 0.6, None)),
(("Equalize", 0.0, None), ("Equalize", 0.8, None)), (("Invert", 0.6, None), ("Equalize", 1.0, None)),
(("Color", 0.6, 4), ("Contrast", 1.0, 8)), (("Rotate", 0.8, 8), ("Color", 1.0, 2)),
(("Color", 0.8, 8), ("Solarize", 0.8, 7)), (("Sharpness", 0.4, 7), ("Invert", 0.6, None)),
(("ShearX", 0.6, 5), ("Equalize", 1.0, None)), (("Color", 0.4, 0), ("Equalize", 0.6, None)),
(("Equalize", 0.4, None), ("Solarize", 0.2, 4)), (("Solarize", 0.6, 5), ("AutoContrast", 0.6, None)),
(("Invert", 0.6, None), ("Equalize", 1.0, None)), (("Color", 0.6, 4), ("Contrast", 1.0, 8)),
(("Equalize", 0.8, None), ("Equalize", 0.6, None))]
- ``AutoAugmentPolicy.CIFAR10``: dataset auto augment policy for Cifar10.
.. code-block::
Augmentation operations pair:
[(("Invert", 0.1, None), ("Contrast", 0.2, 6)), (("Rotate", 0.7, 2), ("TranslateX", 0.3, 9)),
(("Sharpness", 0.8, 1), ("Sharpness", 0.9, 3)), (("ShearY", 0.5, 8), ("TranslateY", 0.7, 9)),
(("AutoContrast", 0.5, None), ("Equalize", 0.9, None)), (("ShearY", 0.2, 7), ("Posterize", 0.3, 7)),
(("Color", 0.4, 3), ("Brightness", 0.6, 7)), (("Sharpness", 0.3, 9), ("Brightness", 0.7, 9)),
(("Equalize", 0.6, None), ("Equalize", 0.5, None)), (("Contrast", 0.6, 7), ("Sharpness", 0.6, 5)),
(("Color", 0.7, 7), ("TranslateX", 0.5, 8)), (("Equalize", 0.8, None), ("Invert", 0.1, None)),
(("TranslateY", 0.4, 3), ("Sharpness", 0.2, 6)), (("Brightness", 0.9, 6), ("Color", 0.2, 8)),
(("Solarize", 0.5, 2), ("Invert", 0.0, None)), (("TranslateY", 0.9, 9), ("TranslateY", 0.7, 9)),
(("Equalize", 0.2, None), ("Equalize", 0.6, None)), (("Color", 0.9, 9), ("Equalize", 0.6, None)),
(("AutoContrast", 0.8, None), ("Solarize", 0.2, 8)), (("Brightness", 0.1, 3), ("Color", 0.7, 0)),
(("Solarize", 0.4, 5), ("AutoContrast", 0.9, None)),
(("AutoContrast", 0.9, None), ("Solarize", 0.8, 3)),
(("TranslateY", 0.7, 9), ("AutoContrast", 0.9, None)),
(("Equalize", 0.3, None), ("AutoContrast", 0.4, None)),
(("Equalize", 0.2, None), ("AutoContrast", 0.6, None))]
- ``AutoAugmentPolicy.SVHN``: dataset auto augment policy for SVHN.
.. code-block::
Augmentation operations pair:
[(("ShearX", 0.9, 4), ("Invert", 0.2, None)), (("ShearY", 0.9, 8), ("Invert", 0.7, None)),
(("Equalize", 0.6, None), ("Solarize", 0.6, 6)), (("Invert", 0.9, None), ("Equalize", 0.6, None)),
(("Equalize", 0.6, None), ("Rotate", 0.9, 3)), (("ShearX", 0.9, 4), ("AutoContrast", 0.8, None)),
(("ShearY", 0.9, 8), ("Invert", 0.4, None)), (("ShearY", 0.9, 5), ("Solarize", 0.2, 6)),
(("Invert", 0.9, None), ("AutoContrast", 0.8, None)), (("Equalize", 0.6, None), ("Rotate", 0.9, 3)),
(("ShearX", 0.9, 4), ("Solarize", 0.3, 3)), (("ShearY", 0.8, 8), ("Invert", 0.7, None)),
(("Equalize", 0.9, None), ("TranslateY", 0.6, 6)), (("Invert", 0.9, None), ("Equalize", 0.6, None)),
(("Contrast", 0.3, 3), ("Rotate", 0.8, 4)), (("Invert", 0.8, None), ("TranslateY", 0.0, 2)),
(("ShearY", 0.7, 6), ("Solarize", 0.4, 8)), (("Invert", 0.6, None), ("Rotate", 0.8, 4)),
(("ShearY", 0.3, 7), ("TranslateX", 0.9, 3)), (("ShearX", 0.1, 6), ("Invert", 0.6, None)),
(("Solarize", 0.7, 2), ("TranslateY", 0.6, 7)), (("ShearY", 0.8, 4), ("Invert", 0.8, None)),
(("ShearX", 0.7, 9), ("TranslateY", 0.8, 3)), (("ShearY", 0.8, 5), ("AutoContrast", 0.7, None)),
(("ShearX", 0.7, 2), ("Invert", 0.1, None))]
"""
IMAGENET: str = "imagenet"
CIFAR10: str = "cifar10"
SVHN: str = "svhn"
@staticmethod
def to_c_type(policy):
"""
Function to return C type for AutoAugment policy.
"""
c_values = {AutoAugmentPolicy.IMAGENET: cde.AutoAugmentPolicy.DE_AUTO_AUGMENT_POLICY_IMAGENET,
AutoAugmentPolicy.CIFAR10: cde.AutoAugmentPolicy.DE_AUTO_AUGMENT_POLICY_CIFAR10,
AutoAugmentPolicy.SVHN: cde.AutoAugmentPolicy.DE_AUTO_AUGMENT_POLICY_SVHN}
value = c_values.get(policy)
if value is None:
raise RuntimeError("Unsupported AutoAugmentPolicy, only support IMAGENET, CIFAR10, and SVHN.")
return value
[文档]class Border(str, Enum):
"""
Padding Mode, Border Type.
Possible enumeration values are: ``Border.CONSTANT``, ``Border.EDGE``, ``Border.REFLECT``, ``Border.SYMMETRIC``.
- ``Border.CONSTANT`` : means it fills the border with constant values.
- ``Border.EDGE`` : means it pads with the last value on the edge.
- ``Border.REFLECT`` : means it reflects the values on the edge omitting the last value of edge.
For example, padding [1,2,3,4] with 2 elements on both sides will result in [3,2,1,2,3,4,3,2].
- ``Border.SYMMETRIC`` : means it reflects the values on the edge repeating the last value of edge.
For example, padding [1,2,3,4] with 2 elements on both sides will result in [2,1,1,2,3,4,4,3].
Note:
This class derived from class str to support json serializable.
"""
CONSTANT: str = "constant"
EDGE: str = "edge"
REFLECT: str = "reflect"
SYMMETRIC: str = "symmetric"
@staticmethod
def to_python_type(border_type):
"""
Function to return Python type for Border Type.
"""
python_values = {Border.CONSTANT: 'constant',
Border.EDGE: 'edge',
Border.REFLECT: 'reflect',
Border.SYMMETRIC: 'symmetric'}
value = python_values.get(border_type)
if value is None:
raise RuntimeError("Unsupported Border type, only support CONSTANT, EDGE, REFLECT and SYMMETRIC.")
return value
@staticmethod
def to_c_type(border_type):
"""
Function to return C type for Border Type.
"""
c_values = {Border.CONSTANT: cde.BorderType.DE_BORDER_CONSTANT,
Border.EDGE: cde.BorderType.DE_BORDER_EDGE,
Border.REFLECT: cde.BorderType.DE_BORDER_REFLECT,
Border.SYMMETRIC: cde.BorderType.DE_BORDER_SYMMETRIC}
value = c_values.get(border_type)
if value is None:
raise RuntimeError("Unsupported Border type, only support CONSTANT, EDGE, REFLECT and SYMMETRIC.")
return value
[文档]class ConvertMode(IntEnum):
"""
The color conversion mode.
Possible enumeration values are as follows:
- ConvertMode.COLOR_BGR2BGRA: convert BGR format images to BGRA format images.
- ConvertMode.COLOR_RGB2RGBA: convert RGB format images to RGBA format images.
- ConvertMode.COLOR_BGRA2BGR: convert BGRA format images to BGR format images.
- ConvertMode.COLOR_RGBA2RGB: convert RGBA format images to RGB format images.
- ConvertMode.COLOR_BGR2RGBA: convert BGR format images to RGBA format images.
- ConvertMode.COLOR_RGB2BGRA: convert RGB format images to BGRA format images.
- ConvertMode.COLOR_RGBA2BGR: convert RGBA format images to BGR format images.
- ConvertMode.COLOR_BGRA2RGB: convert BGRA format images to RGB format images.
- ConvertMode.COLOR_BGR2RGB: convert BGR format images to RGB format images.
- ConvertMode.COLOR_RGB2BGR: convert RGB format images to BGR format images.
- ConvertMode.COLOR_BGRA2RGBA: convert BGRA format images to RGBA format images.
- ConvertMode.COLOR_RGBA2BGRA: convert RGBA format images to BGRA format images.
- ConvertMode.COLOR_BGR2GRAY: convert BGR format images to GRAY format images.
- ConvertMode.COLOR_RGB2GRAY: convert RGB format images to GRAY format images.
- ConvertMode.COLOR_GRAY2BGR: convert GRAY format images to BGR format images.
- ConvertMode.COLOR_GRAY2RGB: convert GRAY format images to RGB format images.
- ConvertMode.COLOR_GRAY2BGRA: convert GRAY format images to BGRA format images.
- ConvertMode.COLOR_GRAY2RGBA: convert GRAY format images to RGBA format images.
- ConvertMode.COLOR_BGRA2GRAY: convert BGRA format images to GRAY format images.
- ConvertMode.COLOR_RGBA2GRAY: convert RGBA format images to GRAY format images.
"""
COLOR_BGR2BGRA = 0
COLOR_RGB2RGBA = COLOR_BGR2BGRA
COLOR_BGRA2BGR = 1
COLOR_RGBA2RGB = COLOR_BGRA2BGR
COLOR_BGR2RGBA = 2
COLOR_RGB2BGRA = COLOR_BGR2RGBA
COLOR_RGBA2BGR = 3
COLOR_BGRA2RGB = COLOR_RGBA2BGR
COLOR_BGR2RGB = 4
COLOR_RGB2BGR = COLOR_BGR2RGB
COLOR_BGRA2RGBA = 5
COLOR_RGBA2BGRA = COLOR_BGRA2RGBA
COLOR_BGR2GRAY = 6
COLOR_RGB2GRAY = 7
COLOR_GRAY2BGR = 8
COLOR_GRAY2RGB = COLOR_GRAY2BGR
COLOR_GRAY2BGRA = 9
COLOR_GRAY2RGBA = COLOR_GRAY2BGRA
COLOR_BGRA2GRAY = 10
COLOR_RGBA2GRAY = 11
@staticmethod
def to_c_type(mode):
"""
Function to return C type for color mode.
"""
c_values = {ConvertMode.COLOR_BGR2BGRA: cde.ConvertMode.DE_COLOR_BGR2BGRA,
ConvertMode.COLOR_RGB2RGBA: cde.ConvertMode.DE_COLOR_RGB2RGBA,
ConvertMode.COLOR_BGRA2BGR: cde.ConvertMode.DE_COLOR_BGRA2BGR,
ConvertMode.COLOR_RGBA2RGB: cde.ConvertMode.DE_COLOR_RGBA2RGB,
ConvertMode.COLOR_BGR2RGBA: cde.ConvertMode.DE_COLOR_BGR2RGBA,
ConvertMode.COLOR_RGB2BGRA: cde.ConvertMode.DE_COLOR_RGB2BGRA,
ConvertMode.COLOR_RGBA2BGR: cde.ConvertMode.DE_COLOR_RGBA2BGR,
ConvertMode.COLOR_BGRA2RGB: cde.ConvertMode.DE_COLOR_BGRA2RGB,
ConvertMode.COLOR_BGR2RGB: cde.ConvertMode.DE_COLOR_BGR2RGB,
ConvertMode.COLOR_RGB2BGR: cde.ConvertMode.DE_COLOR_RGB2BGR,
ConvertMode.COLOR_BGRA2RGBA: cde.ConvertMode.DE_COLOR_BGRA2RGBA,
ConvertMode.COLOR_RGBA2BGRA: cde.ConvertMode.DE_COLOR_RGBA2BGRA,
ConvertMode.COLOR_BGR2GRAY: cde.ConvertMode.DE_COLOR_BGR2GRAY,
ConvertMode.COLOR_RGB2GRAY: cde.ConvertMode.DE_COLOR_RGB2GRAY,
ConvertMode.COLOR_GRAY2BGR: cde.ConvertMode.DE_COLOR_GRAY2BGR,
ConvertMode.COLOR_GRAY2RGB: cde.ConvertMode.DE_COLOR_GRAY2RGB,
ConvertMode.COLOR_GRAY2BGRA: cde.ConvertMode.DE_COLOR_GRAY2BGRA,
ConvertMode.COLOR_GRAY2RGBA: cde.ConvertMode.DE_COLOR_GRAY2RGBA,
ConvertMode.COLOR_BGRA2GRAY: cde.ConvertMode.DE_COLOR_BGRA2GRAY,
ConvertMode.COLOR_RGBA2GRAY: cde.ConvertMode.DE_COLOR_RGBA2GRAY,
}
mode = c_values.get(mode)
if mode is None:
raise RuntimeError("Unsupported ConvertMode, see https://www.mindspore.cn/docs/zh-CN/r2.3.1/api_python/"
"dataset_vision/mindspore.dataset.vision.ConvertColor.html for more details.")
return mode
[文档]class ImageReadMode(IntEnum):
"""
The read mode used for the image file.
Possible enumeration values are: ``ImageReadMode.UNCHANGED``, ``ImageReadMode.GRAYSCALE``, ``ImageReadMode.COLOR``.
- ``ImageReadMode.UNCHANGED``: remain the output in the original format.
- ``ImageReadMode.GRAYSCALE``: convert the output into one channel grayscale data.
- ``ImageReadMode.COLOR``: convert the output into three channels RGB color data.
"""
UNCHANGED = 0
GRAYSCALE = 1
COLOR = 2
@staticmethod
def to_c_type(image_read_mode):
"""
Function to return C type for ImageReadMode.
"""
c_values = {ImageReadMode.UNCHANGED: cde.ImageReadMode.DE_IMAGE_READ_MODE_UNCHANGED,
ImageReadMode.GRAYSCALE: cde.ImageReadMode.DE_IMAGE_READ_MODE_GRAYSCALE,
ImageReadMode.COLOR: cde.ImageReadMode.DE_IMAGE_READ_MODE_COLOR}
value = c_values.get(image_read_mode)
if value is None:
raise RuntimeError("Unsupported ImageReadMode, only support UNCHANGED, GRAYSCALE and COLOR.")
return value
[文档]class Inter(IntEnum):
"""
Interpolation methods.
Available values are as follows:
- ``Inter.NEAREST`` : Nearest neighbor interpolation.
- ``Inter.ANTIALIAS`` : Antialias interpolation. Supported only when the input is PIL.Image.Image.
- ``Inter.LINEAR`` : Linear interpolation, the same as ``Inter.BILINEAR``.
- ``Inter.BILINEAR`` : Bilinear interpolation.
- ``Inter.CUBIC`` : Cubic interpolation, the same as ``Inter.BICUBIC``.
- ``Inter.BICUBIC`` : Bicubic interpolation.
- ``Inter.AREA`` : Pixel area interpolation. Supported only when the input is numpy.ndarray.
- ``Inter.PILCUBIC`` : Pillow implementation of bicubic interpolation. Supported only when the input
is numpy.ndarray.
"""
NEAREST = 0
ANTIALIAS = 1
BILINEAR = LINEAR = 2
BICUBIC = CUBIC = 3
AREA = 4
PILCUBIC = 5
@staticmethod
def to_python_type(inter_type):
"""
Function to return Python type for Interpolation Mode.
"""
python_values = {Inter.NEAREST: NEAREST,
Inter.ANTIALIAS: ANTIALIAS,
Inter.LINEAR: LINEAR,
Inter.CUBIC: CUBIC}
value = python_values.get(inter_type)
if value is None:
raise RuntimeError("Unsupported interpolation, only support NEAREST, ANTIALIAS, LINEAR and CUBIC.")
return value
@staticmethod
def to_c_type(inter_type):
"""
Function to return C type for Interpolation Mode.
"""
c_values = {Inter.NEAREST: cde.InterpolationMode.DE_INTER_NEAREST_NEIGHBOUR,
Inter.LINEAR: cde.InterpolationMode.DE_INTER_LINEAR,
Inter.CUBIC: cde.InterpolationMode.DE_INTER_CUBIC,
Inter.AREA: cde.InterpolationMode.DE_INTER_AREA,
Inter.PILCUBIC: cde.InterpolationMode.DE_INTER_PILCUBIC}
value = c_values.get(inter_type)
if value is None:
raise RuntimeError("Unsupported interpolation, only support NEAREST, LINEAR, CUBIC, AREA and PILCUBIC.")
return value
[文档]class SliceMode(IntEnum):
"""
Mode to Slice Tensor into multiple parts.
Possible enumeration values are: ``SliceMode.PAD``, ``SliceMode.DROP``.
- ``SliceMode.PAD``: pad some pixels before slice the Tensor if needed.
- ``SliceMode.DROP``: drop remainder pixels before slice the Tensor if needed.
"""
PAD = 0
DROP = 1
@staticmethod
def to_c_type(mode):
"""
Function to return C type for SliceMode.
"""
c_values = {SliceMode.PAD: cde.SliceMode.DE_SLICE_PAD,
SliceMode.DROP: cde.SliceMode.DE_SLICE_DROP}
value = c_values.get(mode)
if value is None:
raise RuntimeError("Unsupported SliceMode, only support PAD and DROP.")
return value
[文档]def encode_jpeg(image, quality=75):
"""
Encode the input image as JPEG data.
Args:
image (Union[numpy.ndarray, mindspore.Tensor]): The image to be encoded.
quality (int, optional): Quality of the resulting JPEG data, in range of [1, 100]. Default: ``75``.
Returns:
numpy.ndarray, one dimension uint8 data.
Raises:
TypeError: If `image` is not of type numpy.ndarray or mindspore.Tensor.
TypeError: If `quality` is not of type int.
RuntimeError: If the data type of `image` is not uint8.
RuntimeError: If the shape of `image` is not <H, W> or <H, W, 1> or <H, W, 3>.
RuntimeError: If `quality` is less than 1 or greater than 100.
Supported Platforms:
``CPU``
Examples:
>>> import mindspore.dataset.vision as vision
>>> import numpy as np
>>> # Generate a random image with height=120, width=340, channels=3
>>> image = np.random.randint(256, size=(120, 340, 3), dtype=np.uint8)
>>> jpeg_data = vision.encode_jpeg(image)
"""
if not isinstance(quality, int):
raise TypeError("Input quality is not of type {0}, but got: {1}.".format(int, type(quality)))
if isinstance(image, np.ndarray):
return cde.encode_jpeg(cde.Tensor(image), quality).as_array()
if isinstance(image, mindspore.Tensor):
return cde.encode_jpeg(cde.Tensor(image.asnumpy()), quality).as_array()
raise TypeError("Input image is not of type {0} or {1}, but got: {2}.".format(np.ndarray,
mindspore.Tensor, type(image)))
[文档]def encode_png(image, compression_level=6):
"""
Encode the input image as PNG data.
Args:
image (Union[numpy.ndarray, mindspore.Tensor]): The image to be encoded.
compression_level (int, optional): The `compression_level` for encoding, in range of [0, 9].
Default: ``6``.
Returns:
numpy.ndarray, one dimension uint8 data.
Raises:
TypeError: If `image` is not of type numpy.ndarray or mindspore.Tensor.
TypeError: If `compression_level` is not of type int.
RuntimeError: If the data type of `image` is not uint8.
RuntimeError: If the shape of `image` is not <H, W> or <H, W, 1> or <H, W, 3>.
RuntimeError: If `compression_level` is less than 0 or greater than 9.
Supported Platforms:
``CPU``
Examples:
>>> import mindspore.dataset.vision as vision
>>> import numpy as np
>>> # Generate a random image with height=120, width=340, channels=3
>>> image = np.random.randint(256, size=(120, 340, 3), dtype=np.uint8)
>>> png_data = vision.encode_png(image)
"""
if not isinstance(compression_level, int):
raise TypeError("Input compression_level is not of type {0}, but got: {1}.".format(int,
type(compression_level)))
if isinstance(image, np.ndarray):
return cde.encode_png(cde.Tensor(image), compression_level).as_array()
if isinstance(image, mindspore.Tensor):
return cde.encode_png(cde.Tensor(image.asnumpy()), compression_level).as_array()
raise TypeError("Input image is not of type {0} or {1}, but got: {2}.".format(np.ndarray,
mindspore.Tensor, type(image)))
[文档]def get_image_num_channels(image):
"""
Get the number of input image channels.
Args:
image (Union[numpy.ndarray, PIL.Image.Image]): Image to get the number of channels.
Returns:
int, the number of input image channels.
Raises:
RuntimeError: If the dimension of `image` is less than 2.
TypeError: If `image` is not of type <class 'numpy.ndarray'> or <class 'PIL.Image.Image'>.
Examples:
>>> import mindspore.dataset.vision as vision
>>> from PIL import Image
>>> image = Image.open("/path/to/image_file")
>>> num_channels = vision.get_image_num_channels(image)
"""
if isinstance(image, np.ndarray):
return cde.get_image_num_channels(cde.Tensor(image))
if isinstance(image, Image.Image):
if hasattr(image, "getbands"):
return len(image.getbands())
return image.channels
raise TypeError("Input image is not of type {0} or {1}, but got: {2}.".format(np.ndarray, Image.Image, type(image)))
[文档]def get_image_size(image):
"""
Get the size of input image as [height, width].
Args:
image (Union[numpy.ndarray, PIL.Image.Image]): The image to get size.
Returns:
list[int, int], the image size.
Raises:
RuntimeError: If the dimension of `image` is less than 2.
TypeError: If `image` is not of type <class 'numpy.ndarray'> or <class 'PIL.Image.Image'>.
Examples:
>>> import mindspore.dataset.vision as vision
>>> from PIL import Image
>>> image = Image.open("/path/to/image_file")
>>> image_size = vision.get_image_size(image)
"""
if isinstance(image, np.ndarray):
return cde.get_image_size(cde.Tensor(image))
if isinstance(image, Image.Image):
size_list = list(image.size)
size_list[0], size_list[1] = size_list[1], size_list[0]
return size_list
raise TypeError("Input image is not of type {0} or {1}, but got: {2}.".format(np.ndarray, Image.Image, type(image)))
def parse_padding(padding):
""" Parses and prepares the padding tuple"""
if isinstance(padding, numbers.Number):
padding = [padding] * 4
if len(padding) == 2:
left = right = padding[0]
top = bottom = padding[1]
padding = (left, top, right, bottom,)
if isinstance(padding, list):
padding = tuple(padding)
return padding
[文档]def read_file(filename):
"""
Read a file in binary mode.
Args:
filename(str): The path to the file to be read.
Returns:
numpy.ndarray, the one dimension uint8 data.
Raises:
TypeError: If `filename` is not of type str.
RuntimeError: If `filename` does not exist or is not a common file.
Supported Platforms:
``CPU``
Examples:
>>> import mindspore.dataset.vision as vision
>>> output = vision.read_file("/path/to/file")
"""
if isinstance(filename, str):
return cde.read_file(filename).as_array()
raise TypeError("Input filename is not of type {0}, but got: {1}.".format(str, type(filename)))
[文档]def read_image(filename, mode=ImageReadMode.UNCHANGED):
"""
Read a image file and decode it into one channel grayscale data or RGB color data.
Supported file types are JPEG, PNG, BMP, TIFF.
Args:
filename(str): The path to the image file to be read.
mode(ImageReadMode, optional): The mode used for decoding the image. It can be
``ImageReadMode.UNCHANGED``, ``ImageReadMode.GRAYSCALE``, ``IMageReadMode.COLOR``.
Default: ``ImageReadMode.UNCHANGED``.
- ImageReadMode.UNCHANGED, remain the output in the original format.
- ImageReadMode.GRAYSCALE, convert the output into one channel grayscale data.
- IMageReadMode.COLOR, convert the output into three channels RGB color data.
Returns:
numpy.ndarray, three dimensions uint8 data in the shape of (Height, Width, Channels).
Raises:
TypeError: If `filename` is not of type str.
TypeError: If `mode` is not of type :class:`mindspore.dataset.vision.ImageReadMode` .
RuntimeError: If `filename` does not exist, or not a regular file, or not a supported image file.
Supported Platforms:
``CPU``
Examples:
>>> import mindspore.dataset.vision as vision
>>> from mindspore.dataset.vision import ImageReadMode
>>> output = vision.read_image("/path/to/image_file", ImageReadMode.UNCHANGED)
"""
if not isinstance(filename, str):
raise TypeError("Input filename is not of type {0}, but got: {1}.".format(str, type(filename)))
if not isinstance(mode, ImageReadMode):
raise TypeError("Input mode is not of type {0}, but got: {1}.".format(ImageReadMode, type(mode)))
return cde.read_image(filename, ImageReadMode.to_c_type(mode)).as_array()
[文档]def read_video(filename, start_pts=0, end_pts=None, pts_unit="pts"):
"""
Read the video, audio, metadata from a video file.
It supports AVI, H264, H265, MOV, MP4, WMV file formats.
Args:
filename(str): The path to the video file to be read.
start_pts(Union[float, Fraction, int], optional): The start presentation timestamp of the video. Default: 0.
end_pts(Union[float, Fraction, int], optional): The end presentation timestamp of the video. Default: None.
The None is represented by 2147483647.
pts_unit(str, optional): The unit of the timestamps. It can be any of ["pts", "sec"]. Default: "pts".
Returns:
- numpy.ndarray, four dimensions uint8 data for video. The format is [T, H, W, C]. `T` is the number of frames,
`H` is the height, `W` is the width, `C` is the channel for RGB.
- numpy.ndarray, two dimensions float for audio. The format is [C, L]. `C` is the number of channels.
`L` is the length of the points in one channel.
- dict, metadata for the video and audio.
It contains video_fps data of type float and audio_fps data of type int.
Raises:
TypeError: If `filename` is not of type str.
TypeError: If `start_pts` is not of type [float, Fraction, int].
TypeError: If `end_pts` is not of type [float, Fraction, int].
TypeError: If `pts_unit` is not of type str.
RuntimeError: If `filename` does not exist, or not a regular file, or not a supported video file.
ValueError: If `start_pts` is less than 0.
ValueError: If `end_pts` is less than `start_pts`.
ValueError: If `pts_unit` is not in ["pts", "sec"].
Supported Platforms:
``CPU``
Examples:
>>> import mindspore.dataset.vision as vision
>>> video_output, audio_output, metadata_output = vision.read_video("/path/to/file")
"""
if not isinstance(filename, str):
raise TypeError("Input filename is not of type {0}, but got: {1}.".format(str, type(filename)))
if not isinstance(start_pts, (float, Fraction, int)):
raise TypeError("Input start_pts is not of type [{0}, {1}, {2}], but got: {3}".format(float, Fraction, int,
type(start_pts)))
if start_pts < 0.0:
err_msg = "Not supported start_pts for " + str(start_pts) + ". The start_pts should be >= 0."
raise ValueError(err_msg)
if end_pts is None:
end_pts = 2147483647.0
if not isinstance(end_pts, (float, Fraction, int)):
raise TypeError("Input end_pts is not of type [{0}, {1}, {2}], but got: {3}".format(float, Fraction, int,
type(end_pts)))
if end_pts < start_pts:
err_msg = "Not supported end_pts for " + str(end_pts) + ". start_pts = " + str(start_pts) + "."
err_msg += " The end_pts should be >= start_pts."
raise ValueError(err_msg)
if not isinstance(pts_unit, str):
raise TypeError("Input pts_unit is not of type {0}, but got: {1}.".format(str, type(pts_unit)))
if pts_unit not in ["pts", "sec"]:
raise ValueError("Not supported pts_unit for " + pts_unit)
video_output, audio_output, raw_metadata = cde.read_video(filename, float(start_pts), float(end_pts), pts_unit)
if video_output is not None:
video_output = video_output.as_array()
if audio_output is not None:
audio_output = audio_output.as_array()
metadata_output = {}
for key in raw_metadata:
if key == "video_fps":
metadata_output[key] = float(raw_metadata[key])
continue
if key == "audio_fps":
metadata_output[key] = int(raw_metadata[key])
continue
metadata_output[key] = raw_metadata[key]
return video_output, audio_output, metadata_output
[文档]def read_video_timestamps(filename, pts_unit="pts"):
"""
Read the timestamps and frames per second of a video file.
It supports AVI, H264, H265, MOV, MP4, WMV files.
Args:
filename(str): The path to the video file to be read.
pts_unit(str, optional): The unit of the timestamps. It can be any of ["pts", "sec"]. Default: "pts".
Returns:
- list, when `pts_unit` is set to "pts", list[int] is returned, when `pts_unit` is set to "sec",
list[float] is returned.
- float, the frames per second of the video file.
Raises:
TypeError: If `filename` is not of type str.
TypeError: If `pts_unit` is not of type str.
RuntimeError: If `filename` does not exist, or not a regular file, or not a supported video file.
RuntimeError: If `pts_unit` is not in ["pts", "sec"].
Supported Platforms:
``CPU``
Examples:
>>> import mindspore.dataset.vision as vision
>>> video_timestamps, video_fps = vision.read_video_timestamps("/path/to/file")
"""
if not isinstance(filename, str):
raise TypeError("Input filename is not of type {0}, but got: {1}.".format(str, type(filename)))
if not isinstance(pts_unit, str):
raise TypeError("Input pts_unit is not of type {0}, but got: {1}.".format(str, type(pts_unit)))
video_pts, video_fps, time_base = cde.read_video_timestamps(filename, pts_unit)
if video_pts == []:
return video_pts, None
if pts_unit == "pts":
return video_pts, video_fps
return [x * time_base for x in video_pts], video_fps
[文档]def write_file(filename, data):
"""
Write the one dimension uint8 data into a file using binary mode.
Args:
filename (str): The path to the file to be written.
data (Union[numpy.ndarray, mindspore.Tensor]): The one dimension uint8 data to be written.
Raises:
TypeError: If `filename` is not of type str.
TypeError: If `data` is not of type numpy.ndarray or mindspore.Tensor.
RuntimeError: If the `filename` is not a common file.
RuntimeError: If the data type of `data` is not uint8.
RuntimeError: If the shape of `data` is not a one-dimensional array.
Supported Platforms:
``CPU``
Examples:
>>> import mindspore.dataset.vision as vision
>>> import numpy as np
>>> # Generate a random data with 1024 bytes
>>> data = np.random.randint(256, size=(1024), dtype=np.uint8)
>>> vision.write_file("/path/to/file", data)
"""
if not isinstance(filename, str):
raise TypeError("Input filename is not of type {0}, but got: {1}.".format(str, type(filename)))
if isinstance(data, np.ndarray):
return cde.write_file(filename, cde.Tensor(data))
if isinstance(data, mindspore.Tensor):
return cde.write_file(filename, cde.Tensor(data.asnumpy()))
raise TypeError("Input data is not of type {0} or {1}, but got: {2}.".format(np.ndarray,
mindspore.Tensor, type(data)))
[文档]def write_jpeg(filename, image, quality=75):
"""
Write the image data into a JPEG file.
Args:
filename (str): The path to the file to be written.
image (Union[numpy.ndarray, mindspore.Tensor]): The image data to be written.
quality (int, optional): Quality of the resulting JPEG file, in range of [1, 100]. Default: ``75``.
Raises:
TypeError: If `filename` is not of type str.
TypeError: If `image` is not of type numpy.ndarray or mindspore.Tensor.
TypeError: If `quality` is not of type int.
RuntimeError: If the `filename` does not exist or not a common file.
RuntimeError: If the data type of `image` is not uint8.
RuntimeError: If the shape of `image` is not <H, W> or <H, W, 1> or <H, W, 3>.
RuntimeError: If `quality` is less than 1 or greater than 100.
Supported Platforms:
``CPU``
Examples:
>>> import mindspore.dataset.vision as vision
>>> import numpy as np
>>> # Generate a random image with height=120, width=340, channels=3
>>> image = np.random.randint(256, size=(120, 340, 3), dtype=np.uint8)
>>> vision.write_jpeg("/path/to/file", image)
"""
if not isinstance(filename, str):
raise TypeError("Input filename is not of type {0}, but got: {1}.".format(str, type(filename)))
if not isinstance(quality, int):
raise TypeError("Input quality is not of type {0}, but got: {1}.".format(int, type(quality)))
if isinstance(image, np.ndarray):
return cde.write_jpeg(filename, cde.Tensor(image), quality)
if isinstance(image, mindspore.Tensor):
return cde.write_jpeg(filename, cde.Tensor(image.asnumpy()), quality)
raise TypeError("Input image is not of type {0} or {1}, but got: {2}.".format(np.ndarray,
mindspore.Tensor, type(image)))
[文档]def write_png(filename, image, compression_level=6):
"""
Write the image into a PNG file.
Args:
filename (str): The path to the file to be written.
image (Union[numpy.ndarray, mindspore.Tensor]): The image data to be written.
compression_level (int, optional): Compression level for the resulting PNG file, in range of [0, 9].
Default: ``6``.
Raises:
TypeError: If `filename` is not of type str.
TypeError: If `image` is not of type numpy.ndarray or mindspore.Tensor.
TypeError: If `compression_level` is not of type int.
RuntimeError: If the `filename` does not exist or not a common file.
RuntimeError: If the data type of `image` is not uint8.
RuntimeError: If the shape of `image` is not <H, W> or <H, W, 1> or <H, W, 3>.
RuntimeError: If `compression_level` is less than 0 or greater than 9.
Supported Platforms:
``CPU``
Examples:
>>> import mindspore.dataset.vision as vision
>>> import numpy as np
>>> # Generate a random image with height=120, width=340, channels=3
>>> image = np.random.randint(256, size=(120, 340, 3), dtype=np.uint8)
>>> vision.write_png("/path/to/file", image)
"""
if not isinstance(filename, str):
raise TypeError("Input filename is not of type {0}, but got: {1}.".format(str, type(filename)))
if not isinstance(compression_level, int):
raise TypeError("Input compression_level is not of type {0}, but got: {1}.".format(int,
type(compression_level)))
if isinstance(image, np.ndarray):
return cde.write_png(filename, cde.Tensor(image), compression_level)
if isinstance(image, mindspore.Tensor):
return cde.write_png(filename, cde.Tensor(image.asnumpy()), compression_level)
raise TypeError("The input image is not of type {0} or {1}, but got: {2}.".format(np.ndarray,
mindspore.Tensor, type(image)))